#include "working_page.h" #include "ui_working_page.h" #include "ui_working_page_fbo.h" #include "ui_working_page_fbi.h" #include "IMEKeyBoard/keyboard_num.h" #include "Common/work_thread.h" #include "Drivers/buzzerdrv.h" #include "Common/classxml.h" #define CHARGE_DELAY_TIME 60 static int readDataTimer=0; static bool if_readData=false; static bool if_alarm=false; static bool if_exec=false; #define Type_Btn 0 #define Type_WIFI 1 static bool if_useDroplabel=false; static int btn_update = 0; static int chargeCmd = 0; static double volupplimit = 0; static double vollowlimit = 0; static double minPower = 0; Working_Page::Working_Page(QWidget *parent, Work_Thread *thread) : customDialog(parent), #if PageType == IDCE48CT ui(new Ui::Working_Page) #elif PageType == FBO48CT ui(new Ui::Working_Page_FBO) #elif PageType == FBI48CT ui(new Ui::Working_Page_FBI) #endif { ui->setupUi(this); this->setGeometry(QRect(0,0,800,480)); BD = new BuzzerDrv(); work_thread = thread; if_update = true; initPage(); ClassXML::ReadNewestPNameXml(batteryName); if(false == ClassXML::ReadTestParamXml(batteryName, test_param_xml)) { batteryName = Default_Battery; ClassXML::ModifyNewestPNameXml(batteryName); ClassXML::ReadTestParamXml(batteryName, test_param_xml); } if(PageType == FBI48CT){ test_param_xml.test_mode = ONline_working; if(!TYPE_FBI_10480 && !TYPE_FBI_4548 && !TYPE_FBI_20240) test_param_xml.onlinevol_lowlimit = onlinevollow; } else if(PageType == IDCE48CT) test_param_xml.test_mode = OFFline_working; ui->tableWidget->setEditTriggers(QAbstractItemView::NoEditTriggers); ui->tableWidget->setSelectionMode(QAbstractItemView::NoSelection); ui->tableWidget_2->setEditTriggers(QAbstractItemView::NoEditTriggers); ui->tableWidget_2->setSelectionMode(QAbstractItemView::NoSelection); #ifdef SOFT_ARM_QT4 ui->tableWidget->horizontalHeader()->setResizeMode(QHeaderView::Stretch); ui->tableWidget->verticalHeader()->setResizeMode(QHeaderView::Stretch); ui->tableWidget_2->horizontalHeader()->setResizeMode(QHeaderView::Stretch); ui->tableWidget_2->verticalHeader()->setResizeMode(QHeaderView::Stretch); #else ui->tableWidget->horizontalHeader()->setSectionResizeMode(QHeaderView::Stretch); ui->tableWidget->verticalHeader()->setSectionResizeMode(QHeaderView::Stretch); ui->tableWidget_2->horizontalHeader()->setSectionResizeMode(QHeaderView::Stretch); ui->tableWidget_2->verticalHeader()->setSectionResizeMode(QHeaderView::Stretch); #endif //*************关联设置参数和放电信号****************** connect(this,SIGNAL(sendParam(TEST_PARAM_XML)), work_thread,SLOT(RecvTestParam(TEST_PARAM_XML))); connect(this,SIGNAL(sendStart(int,QString)), work_thread,SLOT(RecvSysCtrlCMD(int,QString))); connect(work_thread,SIGNAL(sendMgBox(quint8)), this,SLOT(popBoxAlarm(quint8))); //读取数据定时器 setIconTime(); // vector_second.clear(); IF_READCUR = 0; getDataTimer = new QTimer(this); connect(getDataTimer,SIGNAL(timeout()),this,SLOT(GetDataSlot())); getDataTimer->setInterval(500); CurrentBox = new MessageBox( this, QMessageBox::Question,MB_Caption, "", QMessageBox::Ok, QMessageBox::Ok, work_thread); ui->edit_mon_id->setAlignment(Qt::AlignCenter); #if PageType == FBO48CT || PageType == FBI48CT ui->label_reserve_1->setVisible(false); ui->label_reserve_2->setVisible(false); ui->label_reserve_3->setVisible(false); ui->label_reserve_4->setVisible(false); ui->edit_reserve_1->setVisible(false); ui->edit_reserve_2->setVisible(false); ui->label_onlinevol_lowlimit->setVisible(false); ui->edit_onlinevol_lowlimit->setVisible(false); ui->label_2->setVisible(false); if(TYPE_FBI_10480 || TYPE_FBI_4548 || TYPE_FBI_20240){ ui->label_onlinevol_lowlimit->setVisible(true); ui->edit_onlinevol_lowlimit->setVisible(true); ui->label_2->setVisible(true); ui->edit_reserve_1->setVisible(true); ui->label_reserve_1->setVisible(true); ui->label_reserve_3->setVisible(true); } #endif } Working_Page::~Working_Page() { delete getDataTimer; delete BD; delete CurrentBox; delete ui; } void Working_Page::CustomEditSlot() { if(work_thread->iconState.wifiState) return; if((!work_thread->IF_J9Close)&&JT_VALUE) { QString msg = tr("设备处于紧急停止状态，请检查并断电重启！"); popBox(msg); return; } Custom_LineEdit *le = dynamic_cast(sender()); if(ui->edit_SetCur == le) { if(test_param_xml.discharge_mode == DISCHARGE_CURRENT) { if(setEditInput(le,0,(double)MinCur/10,999.9,1)) { int cur = ui->edit_SetCur->text().toFloat()*10+0.5; int hourRate = ClassXML::GetHourRate(nominalCap,cur/10)+0.5; ui->edit_HourRate->setText(QString::number(hourRate)); test_param_xml.hourly_rate = hourRate; test_param_xml.preset_cur = cur; ClassXML::ModifyTestParamXml(batteryName,test_param_xml); emit sendParam(test_param_xml); } } else { if(setEditInput(le,0,minPower/1000,999.9,1)) { int power = ui->edit_SetCur->text().toFloat()*10+0.5; test_param_xml.preset_power = power; ClassXML::ModifyTestParamXml(batteryName,test_param_xml); emit sendParam(test_param_xml); } } } else if(ui->edit_SetGroupLow == le) { if(setEditInput(le,1,0,999.9,1)) { test_param_xml.group_lower = le->text().toFloat()*10+0.5; ClassXML::ModifyTestParamXml(batteryName,test_param_xml); emit sendParam(test_param_xml); } } else if(ui->edit_SetMonLow == le) { if(setEditInput(le,1,0,MONUPLIMIT,2)) { test_param_xml.mon_lower = le->text().toFloat()*100+0.5; ClassXML::ModifyTestParamXml(batteryName,test_param_xml); emit sendParam(test_param_xml); } } else if(ui->edit_SetLowNum == le) { if(setEditInput(le,1,MONOMER_NUM_MIN,(test_param_xml.group_number * test_param_xml.mon_number),0)) { test_param_xml.lower_number = le->text().toInt(); ClassXML::ModifyTestParamXml(batteryName,test_param_xml); emit sendParam(test_param_xml); } } else if(ui->edit_SetTime == le) { if(setTimeInput(le,0)) { QString time = le->text(); int hour = time.section(":",0,0).trimmed().toInt(); int minute = time.section(":",1,1).trimmed().toInt(); test_param_xml.preset_time = hour*60+minute; ClassXML::ModifyTestParamXml(batteryName,test_param_xml); emit sendParam(test_param_xml); } } else if(ui->edit_SetCap == le) { if(setEditInput(le,0,1,9999,0)) { test_param_xml.preset_cap = le->text().toInt(); ClassXML::ModifyTestParamXml(batteryName,test_param_xml); emit sendParam(test_param_xml); } } else if(ui->edit_HourRate == le) { if(setEditInput(le,1,1,20,0)) { int hourRate = ui->edit_HourRate->text().toInt(); int cur = ClassXML::GetFDCurrent(nominalCap,hourRate); ui->edit_SetCur->setText(QString::number((float)cur/10,'f',1)); test_param_xml.preset_cur = cur+0.5; test_param_xml.hourly_rate = hourRate; ClassXML::ModifyTestParamXml(batteryName,test_param_xml); emit sendParam(test_param_xml); } } else if(ui->edit_Setmode == le) { if(test_param_xml.discharge_mode == DISCHARGE_CURRENT) { test_param_xml.discharge_mode = DISCHARGE_POWER; ui->edit_Setmode->setText(tr("恒功率")); ui->label_SetCur->setText(tr("预放功率")); ui->label_001->setText("KW"); ui->edit_SetCur->setText(QString::number((float)test_param_xml.preset_power/10,'f',1)); ui->edit_HourRate->setEnabled(false);ui->edit_HourRate->setStyleSheet("color:gray"); } else { test_param_xml.discharge_mode = DISCHARGE_CURRENT; ui->edit_Setmode->setText(tr("恒 流")); ui->label_SetCur->setText(tr("预放电流")); ui->label_001->setText("A"); ui->edit_SetCur->setText(QString::number((float)test_param_xml.preset_cur/10,'f',1)); ui->edit_HourRate->setEnabled(true);ui->edit_HourRate->setStyleSheet("color:black"); } ClassXML::ModifyTestParamXml(batteryName,test_param_xml); emit sendParam(test_param_xml); } // else if(ui->edit_reserve_1 == le){ // if(le->text() == tr("开启")) // le->setText(tr("关闭")); // else // le->setText(tr("开启")); // } #if PageType == FBO48CT else if(ui->edit_workmode == le) { if(test_param_xml.test_mode == ONline_working) { ui->edit_workmode->setText(tr("离线放电")); test_param_xml.test_mode = OFFline_working; // #if TYPE_FBO_2210 ui->label_onlinevol_lowlimit->setVisible(false); ui->edit_onlinevol_lowlimit->setVisible(false); ui->label_2->setVisible(false); // #endif } else { ui->edit_workmode->setText(tr("在线放电")); test_param_xml.test_mode = ONline_working; // #if TYPE_FBO_2210 ui->label_onlinevol_lowlimit->setVisible(true); ui->edit_onlinevol_lowlimit->setVisible(true); ui->label_2->setVisible(true); // #endif if(test_param_xml.acstop_op == ACOFF_STOP) { ui->edit_acstop->setText(tr("停止放电")); } else { ui->edit_acstop->setText(tr("继续放电")); } } ClassXML::ModifyTestParamXml(batteryName,test_param_xml); emit sendParam(test_param_xml); } #endif #if PageType == FBO48CT || PageType == FBI48CT else if(ui->edit_onlinevol_lowlimit == le) { if(setEditInput(le,0,0,999.9,1))//vollowlimit+2 { test_param_xml.onlinevol_lowlimit = le->text().toFloat()*10+0.5; ClassXML::ModifyTestParamXml(batteryName,test_param_xml); emit sendParam(test_param_xml); } } else if(ui->edit_reserve_1 == le) //充电限流 { if(setEditInput(le,0,(double)MinCur/10,999.9,1)) { test_param_xml.charge_limit = le->text().toFloat()*10+0.5; ClassXML::ModifyTestParamXml(batteryName,test_param_xml); emit sendParam(test_param_xml); } } #endif #if PageType == FBI48CT else if(ui->edit_SetBoosterCeiling == le){ if(setEditInput(le,1,volupplimit,volupplimit*1.08,1)) { test_param_xml.booster_ceiling = le->text().toFloat()*10+0.5; ClassXML::ModifyTestParamXml(batteryName,test_param_xml); emit sendParam(test_param_xml); } } #endif #if PageType == FBO48CT || PageType == FBI48CT else if(ui->edit_acstop == le) { if(test_param_xml.acstop_op == ACOFF_STOP) { ui->edit_acstop->setText(tr("继续放电")); test_param_xml.acstop_op = ACOFF_CONTINUE; } else { test_param_xml.acstop_op = ACOFF_STOP; ui->edit_acstop->setText(tr("停止放电")); } ClassXML::ModifyTestParamXml(batteryName,test_param_xml); emit sendParam(test_param_xml); } #endif } void Working_Page::ChartMonEditSlot() { setChartEditInput(ui->edit_mon_id,1,GmonNum); updateMonChart(chartMonID-1); } bool Working_Page::AutoStartChargeTest() { // qDebug()<<"进入自动充电测试"; ui->comboBox_Type->setCurrentIndex(1); setParamEnabled(false); work_thread->initWorkPageShow(); if((work_thread->localData.RLY_OK & IGBT_VALUE)&& (work_thread->fboData.SumVoltage>F0VOL)) { if(work_thread->iconState.wifiState) { ; } else { popBox(tr("FO未闭合！")); } return false; } // qDebug()<<"AutoStartChargeTest:RLY_OK:"<localData.RLY_OK; emit sendStart(work_thread->CMD_PowerSwithOn,0); if(work_thread->localData.RLY_OK & TKQ_VALUE) { if(work_thread->iconState.wifiState) { ; } else { popBox(tr("请合上F1！")); } BD->BuzzerBeep(50); if(work_thread->localData.RLY_OK & TKQ_VALUE) { emit sendStart(work_thread->CMD_PowerSwithOff,0); if(work_thread->iconState.wifiState) { ; } else { popBox(tr("F1未闭合！")); } return false; } } if(work_thread->localData.GroupVollocalData.GroupVol>VolTooHigh ) { emit sendStart(work_thread->CMD_PowerSwithOff,0); if(work_thread->iconState.wifiState) { ; } else { popBox(tr("电压过高或过低！")); } return false; } memcpy(SingleVolBeforeTest,work_thread->fboData.SingleVol,sizeof(SingleVolBeforeTest)); emit sendStart(work_thread->CMD_StartCharge,batteryName+"/"); if_readData = true;readDataTimer = 1; // qDebug()<<"sendStart after"; return true; } void Working_Page::WorkBtnSlot() { QPushButton *pb = dynamic_cast(sender()); if(ui->pushButton_Exit == pb) { if(!work_thread->localData.SysWorkState) { toHide(); if_useDroplabel=false; emit senddeleteSocket(); return; } MessageBox box( this, QMessageBox::Question,MB_Caption, tr("正在测试中,确定退出吗?"), QMessageBox::Ok|QMessageBox::Cancel, QMessageBox::Ok, work_thread ); if(box.exec() != QMessageBox::Ok) { return; } if(work_thread->localData.SysWorkState == Discharging) { emit sendStart(work_thread->CMD_StopDischarge,batteryName+"/"); } else if(work_thread->localData.SysWorkState == Charging) { emit sendStart(work_thread->CMD_StopCharge,batteryName+"/"); } else if(work_thread->localData.SysWorkState == Paused_Dischg) { emit sendStart(work_thread->CMD_StopDischarge,batteryName+"/"); } else if(work_thread->localData.SysWorkState == Paused_charge) { emit sendStart(work_thread->CMD_StopCharge,batteryName+"/"); } else if(work_thread->localData.SysWorkState == WaitForCharging) { emit sendStart(work_thread->CMD_StopCharge,"");//CMD_PowerSwithOff 倒计时中退出，等到倒计时结束按下“是”需要停止充电 } toHide(); emit senddeleteSocket(); } else if(ui->pushButton_Start == pb) { toStart(Type_Btn); } else if(ui->pushButton_Stop == pb) { toStop(Type_Btn); } else if(ui->pushButton_MonLast == pb || ui->pushButton_MonChartLast == pb) { mon_table.pageIndex--; setMonomerTable(); setMonomerChart(); setMonomerBtnState(); } else if(ui->pushButton_MonNext == pb || ui->pushButton_MonChartNext == pb) { mon_table.pageIndex++; setMonomerTable(); setMonomerChart(); setMonomerBtnState(); } else if(ui->pushButton_MonLast_Test == pb) { chartMonID--; if(chartMonID < 1) chartMonID = GmonNum; ui->edit_mon_id->setText(QString::number(chartMonID)+"/"+ QString::number(GmonNum)); updateMonChart(chartMonID-1); } else if(ui->pushButton_MonNext_Test == pb) { chartMonID++; if(chartMonID > GmonNum) chartMonID = 1; ui->edit_mon_id->setText(QString::number(chartMonID)+"/"+ QString::number(GmonNum)); updateMonChart(chartMonID-1); } #if (PageType == FBO48CT || PageType == FBI48CT)&&CONTROL_ZC else if(ui->pushButton_zch == pb) { toStartZCH(Type_Btn); } #endif } void Working_Page::SendParamSlot() { emit sendParam(test_param_xml); } void Working_Page::GetDataSlot() { if(if_update){ fbodata = work_thread->fboData; lcldata = work_thread->localData; } if(btn_update>0) { btn_update--; } setIconTime(); setTestPage(); //tab1,参数/测试 setMonomerTable(); //tab2,单体列表 setMonomerChart(); //tab3,单体图表 setMonomerBtnState(); //单体界面按钮状态 setEachGroupInfo(test_param_xml.group_number);//tab5分组信息 setStateAlarmAndDrop(work_thread->localData.SysWorkState, //状态,告警,掉线单体 work_thread->localData.WPAlarmState,lcldata.ModuleDropIndex); setDCdataTable();//DCDC模块 //-------------测试曲线-------------- if((readDataTimer++)>=60) { readDataTimer=1; } if((readDataTimer%60==0)&&if_readData && IF_READCUR) { ReadDataSlot(); } //告警蜂鸣器定时器 if((readDataTimer%2==0)&&if_alarm) { alarm_beep(); } //异常蜂鸣器定时器 if((readDataTimer%6==0)&&if_exec&&!if_alarm) { BD->BuzzerBeep(300); } } void Working_Page::ReadDataSlot() { if(work_thread->testFileName == "") return; if(ClassXML::GetGroupVolFBO(work_thread->testFileName,vector_groupvol, vector_cur,vector_cap, vector_second,vector_mon)) { switch(ui->comboBox_ChartType->currentIndex()) { case 0: updateVolChart(); break; case 1: updateCurChart(); break; case 2: updateCapChart(); break; case 3: updateMonChart(chartMonID-1); break; } } } void Working_Page::initPage() { stopType<comboBox_Type->setIconSize(QSize(1, 50)); for(int i=0;icomboBox_Type->addItem(icon,testTypeList.at(i)); } //实时曲线下拉框 chartTypeList<comboBox_ChartType->setIconSize(QSize(1, 50)); for(int i=0;icomboBox_ChartType->addItem(icon,chartTypeList.at(i)); } ui->edit_mon_id->setVisible(false); ui->pushButton_MonLast_Test->setVisible(false); ui->pushButton_MonNext_Test->setVisible(false); ui->comboBox_GroupM->setVisible(false); //单体数据 for(int i=0;i<6;i++) { for(int j=0;j<4;j++) { tableItem = new QTableWidgetItem(""); tableItem->setTextAlignment(0x0084); ui->tableWidget->setItem(i,j,tableItem); } } #if PageType==FBI48CT ui->tableWidget_3->setRowCount(4); for(int i=0;i<4;i++) { for(int j=1;j<5;j++) { tableItem = new QTableWidgetItem("-"); tableItem->setTextAlignment(0x0084); ui->tableWidget_3->setItem(i,j,tableItem); } } #endif //单体图表 initMonomerChart(); //输入框 #if PageType == FBO48CT set_btn_beep(ui->edit_workmode,SIGNAL(custom_click())); connect(ui->edit_workmode,SIGNAL(custom_click()),this,SLOT(CustomEditSlot())); #endif #if PageType == FBI48CT set_btn_beep(ui->edit_SetBoosterCeiling,SIGNAL(custom_click())); connect(ui->edit_SetBoosterCeiling,SIGNAL(custom_click()),this,SLOT(CustomEditSlot())); #endif #if PageType == FBO48CT || PageType == FBI48CT set_btn_beep(ui->edit_acstop,SIGNAL(custom_click())); connect(ui->edit_acstop,SIGNAL(custom_click()),this,SLOT(CustomEditSlot())); set_btn_beep(ui->edit_onlinevol_lowlimit,SIGNAL(custom_click())); connect(ui->edit_onlinevol_lowlimit,SIGNAL(custom_click()),this,SLOT(CustomEditSlot())); // set_btn_beep(ui->edit_reserve_1,SIGNAL(custom_click())); // connect(ui->edit_reserve_1,SIGNAL(custom_click()),this,SLOT(CustomEditSlot())); set_btn_beep(ui->edit_reserve_2,SIGNAL(custom_click())); connect(ui->edit_reserve_2,SIGNAL(custom_click()),this,SLOT(CustomEditSlot())); #endif #if (PageType == FBO48CT || PageType == FBI48CT)&&CONTROL_ZC set_btn_beep(ui->pushButton_zch,SIGNAL(pressed())); connect(ui->pushButton_zch,SIGNAL(released()),this,SLOT(WorkBtnSlot())); #endif set_btn_beep(ui->edit_Setmode,SIGNAL(custom_click())); connect(ui->edit_Setmode,SIGNAL(custom_click()),this,SLOT(CustomEditSlot())); set_btn_beep(ui->edit_SetCur,SIGNAL(custom_click())); connect(ui->edit_SetCur,SIGNAL(custom_click()),this,SLOT(CustomEditSlot())); set_btn_beep(ui->edit_SetGroupLow,SIGNAL(custom_click())); connect(ui->edit_SetGroupLow,SIGNAL(custom_click()),this,SLOT(CustomEditSlot())); set_btn_beep(ui->edit_SetMonLow,SIGNAL(custom_click())); connect(ui->edit_SetMonLow,SIGNAL(custom_click()),this,SLOT(CustomEditSlot())); set_btn_beep(ui->edit_SetLowNum,SIGNAL(custom_click())); connect(ui->edit_SetLowNum,SIGNAL(custom_click()),this,SLOT(CustomEditSlot())); set_btn_beep(ui->edit_SetTime,SIGNAL(custom_click())); connect(ui->edit_SetTime,SIGNAL(custom_click()),this,SLOT(CustomEditSlot())); set_btn_beep(ui->edit_SetCap,SIGNAL(custom_click())); connect(ui->edit_SetCap,SIGNAL(custom_click()),this,SLOT(CustomEditSlot())); set_btn_beep(ui->edit_HourRate,SIGNAL(custom_click())); connect(ui->edit_HourRate,SIGNAL(custom_click()),this,SLOT(CustomEditSlot())); set_btn_beep(ui->edit_mon_id,SIGNAL(custom_click())); connect(ui->edit_mon_id,SIGNAL(custom_click()),this,SLOT(ChartMonEditSlot())); set_btn_beep(ui->edit_reserve_1,SIGNAL(custom_click())); connect(ui->edit_reserve_1,SIGNAL(custom_click()),this,SLOT(CustomEditSlot())); //按键 set_btn_beep(ui->pushButton_Exit,SIGNAL(pressed())); connect(ui->pushButton_Exit,SIGNAL(released()),this,SLOT(WorkBtnSlot())); set_btn_beep(ui->pushButton_Start,SIGNAL(pressed())); connect(ui->pushButton_Start,SIGNAL(released()),this,SLOT(WorkBtnSlot())); set_btn_beep(ui->pushButton_Stop,SIGNAL(pressed())); connect(ui->pushButton_Stop,SIGNAL(released()),this,SLOT(WorkBtnSlot())); set_btn_beep(ui->pushButton_MonLast,SIGNAL(pressed())); connect(ui->pushButton_MonLast,SIGNAL(released()),this,SLOT(WorkBtnSlot())); set_btn_beep(ui->pushButton_MonNext,SIGNAL(pressed())); connect(ui->pushButton_MonNext,SIGNAL(released()),this,SLOT(WorkBtnSlot())); set_btn_beep(ui->pushButton_MonChartLast,SIGNAL(pressed())); connect(ui->pushButton_MonChartLast,SIGNAL(released()),this,SLOT(WorkBtnSlot())); set_btn_beep(ui->pushButton_MonChartNext,SIGNAL(pressed())); connect(ui->pushButton_MonChartNext,SIGNAL(released()),this,SLOT(WorkBtnSlot())); set_btn_beep(ui->pushButton_MonLast_Test,SIGNAL(pressed())); connect(ui->pushButton_MonLast_Test,SIGNAL(released()),this,SLOT(WorkBtnSlot())); set_btn_beep(ui->pushButton_MonNext_Test,SIGNAL(pressed())); connect(ui->pushButton_MonNext_Test,SIGNAL(released()),this,SLOT(WorkBtnSlot())); connect(ui->tabWidget,SIGNAL(currentChanged(int)),this,SLOT(TabcurrentChangeSlot(int))); connect(ui->comboBox_Type,SIGNAL(currentIndexChanged(int)),this,SLOT(TypeComboBoxChangeSlot(int))); connect(ui->comboBox_ChartType,SIGNAL(currentIndexChanged(int)),this,SLOT(TestChartComboBoxChangeSlot(int))); if(!TYPE_IDCE_4815MINI){ ui->label_reserve_1->setVisible(false); ui->edit_reserve_1->setVisible(false); } else{ #ifdef DZBBH if(DZBBH == "FGDZB202108250002DZ"){ ui->edit_reserve_1->setText(tr("开启")); } else { ui->label_reserve_1->setVisible(false); ui->edit_reserve_1->setVisible(false); } #else ui->label_reserve_1->setVisible(false); ui->edit_reserve_1->setVisible(false); #endif } } void Working_Page::initParam() { #if PageType == FBO48CT if(test_param_xml.test_mode == OFFline_working) { ui->edit_workmode->setText(tr("离线放电")); // #if TYPE_FBO_2210 ui->label_onlinevol_lowlimit->setVisible(false); ui->edit_onlinevol_lowlimit->setVisible(false); ui->label_2->setVisible(false); // #endif } else { ui->edit_workmode->setText(tr("在线放电")); // #if TYPE_FBO_2210 ui->label_onlinevol_lowlimit->setVisible(true); ui->edit_onlinevol_lowlimit->setVisible(true); ui->label_2->setVisible(true); // #endif } #endif #if PageType == FBI48CT ui->edit_SetBoosterCeiling->setText(QString::number((float)test_param_xml.booster_ceiling/10,'f',1)); ui->edit_reserve_1->setText(QString::number((float)test_param_xml.charge_limit/10,'f',1)); #endif #if PageType == FBO48CT || PageType == FBI48CT if(test_param_xml.acstop_op == ACOFF_STOP) { ui->edit_acstop->setText(tr("停止放电")); } else { ui->edit_acstop->setText(tr("继续放电")); } ui->edit_onlinevol_lowlimit->setText(QString::number((float)test_param_xml.onlinevol_lowlimit/10,'f',1)); #endif if(test_param_xml.discharge_mode == DISCHARGE_CURRENT) { ui->edit_Setmode->setText(tr("恒 流")); ui->label_SetCur->setText(tr("预放电流")); ui->label_001->setText("A"); ui->edit_SetCur->setText(QString::number((float)test_param_xml.preset_cur/10,'f',1)); } else { ui->edit_Setmode->setText(tr("恒功率")); ui->label_SetCur->setText(tr("预放功率")); ui->label_001->setText("KW"); ui->edit_SetCur->setText(QString::number((float)test_param_xml.preset_power/10,'f',1)); } ui->edit_SetGroupLow->setText(QString::number((float)test_param_xml.group_lower/10,'f',1)); ui->edit_SetMonLow->setText(QString::number((float)test_param_xml.mon_lower/100,'f',2)); if(test_param_xml.lower_number > test_param_xml.group_number * test_param_xml.mon_number) { test_param_xml.lower_number = test_param_xml.group_number * test_param_xml.mon_number; ClassXML::ModifyTestParamXml(batteryName,test_param_xml); emit sendParam(test_param_xml); ui->edit_SetLowNum->setText(QString::number(test_param_xml.lower_number)); } else { ui->edit_SetLowNum->setText(QString::number(test_param_xml.lower_number)); } ui->edit_SetCap->setText(QString::number(test_param_xml.preset_cap)); QString time = QString("%1:%2").arg(test_param_xml.preset_time/60,2,10,QChar('0')).arg(test_param_xml.preset_time%60,2,10,QChar('0')); ui->edit_SetTime->setText(time); ui->edit_HourRate->setText(QString::number(test_param_xml.hourly_rate)); } void Working_Page::setTestPage() { //------------参数/测试界面数据------------------ #if(PageType == FBO48CT || PageType == FBI48CT) if(test_param_xml.test_mode == ONline_working /*|| ui->comboBox_Type->currentIndex() == 1*/){ ui->label_OnlineVol->setText(tr("在线电压：")+QString::number( ((float)fbodata.OnlineVol/10),'f',1)+" V"); }else{ ui->label_OnlineVol->setText(tr("在线电压：---- V")); } #endif ui->label_TestGroupVol->setText(tr("组端电压：")+QString::number( ((float)fbodata.SumVoltage/10),'f',1)+" V"); QString curstr; if(ui->comboBox_Type->currentIndex() == 0){ if(test_param_xml.discharge_mode != DISCHARGE_CURRENT) { float allpower = lcldata.GroupVol*fbodata.SumCurrent; allpower /= 100*1000; //KW if((qAbs(allpower*10-test_param_xml.preset_power)>3)&&(work_thread->localData.SysWorkState == Discharging)) curstr = tr("%1").arg(QString::number(((float)fbodata.SumCurrent/10),'f',1))+" A"+ tr("/ %1").arg(QString::number(allpower,'f',1))+" KW"; else curstr = QString::number(((float)fbodata.SumCurrent/10),'f',1)+" A"+ tr("/ %1").arg(QString::number(allpower,'f',1)+" KW"); } else { if(qAbs(fbodata.SumCurrent-test_param_xml.preset_cur)>20 && work_thread->localData.SysWorkState == Discharging) curstr = tr("%1").arg(QString::number(((float)fbodata.SumCurrent/10),'f',1))+" A"; else curstr = QString::number(((float)fbodata.SumCurrent/10),'f',1)+" A"; } ui->label_TestCur->setText(tr("放电电流：")+curstr); ui->label_TestCap->setText(tr("已放容量：")+QString::number( fbodata.AllCap)+" AH"); ui->label_TestLowNum->setText(tr("已到下限个数：")+QString::number( lcldata.monomerLowCount)); } else { // qDebug()<<"fbodata.SumCurrent:"<label_TestCur->setText(tr("充电电流：")+curstr); ui->label_TestCap->setText(tr("已充容量：")+QString::number( fbodata.AllCap)+" AH"); ui->label_TestLowNum->setText(""); } QString time = QString("%1:%2:%3") .arg(fbodata.m_TestTime.hour,2,10,QChar('0')) .arg(fbodata.m_TestTime.minute,2,10,QChar('0')) .arg(fbodata.m_TestTime.second,2,10,QChar('0')); ui->label_TestTime->setText(tr("已测时间：")+time); } void Working_Page::setEachGroupInfo(quint16 groupnum) { //---------------分组信息数据------------------- for(int i=1;i<=groupnum;i++) { tableItem = ui->tableWidget_2->item(0,i); tableItem->setText(QString::number(i)); tableItem->setTextAlignment(0x0084); //tableWidget->setItem(0,i,tableItem); tableItem = ui->tableWidget_2->item(1,i); tableItem->setText(QString::number( ((float)fbodata.SubCurrent[i-1]/10),'f',1)); tableItem->setTextAlignment(0x0084); //tableWidget->setItem(1,i,tableItem); tableItem = ui->tableWidget_2->item(2,i); tableItem->setText(QString::number( fbodata.SubCap[i-1])); tableItem->setTextAlignment(0x0084); //tableWidget->setItem(2,i,tableItem); tableItem = ui->tableWidget_2->item(3,i); tableItem->setText(format_monomer( lcldata.SMaxIndex[i-1],lcldata.SMaxVol[i-1])); tableItem->setTextAlignment(0x0084); tableItem->setTextColor(QColor(0,255,0)); //tableWidget->setItem(3,i,tableItem); tableItem = ui->tableWidget_2->item(4,i); tableItem->setText(format_monomer( lcldata.SMinIndex[i-1],lcldata.SMinVol[i-1])); tableItem->setTextAlignment(0x0084); tableItem->setTextColor(QColor(255,56,49)); //tableWidget->setItem(4,i,tableItem); } for(int i=groupnum+1;i<5;i++) { ui->tableWidget_2->item(0,i)->setText(""); ui->tableWidget_2->item(1,i)->setText(""); ui->tableWidget_2->item(2,i)->setText(""); ui->tableWidget_2->item(3,i)->setText(""); ui->tableWidget_2->item(4,i)->setText(""); } ui->label_TestGroupNum->setText(tr("测试组数：")+QString::number(test_param_xml.group_number)); } void Working_Page::setStateAlarmAndDrop(quint8 state, quint8 alarm, quint16 drop) { //---------------按键状态---------------- quint8 is_start_alarm_time = 0; if(!btn_update) { ui->pushButton_Exit->setEnabled(true); switch(state) { case WorkStopped: volupplimit = (double)work_thread->localData.OnlineVol/10; vollowlimit = (double)work_thread->localData.GroupVol/10; minPower = (double)work_thread->fboData.SumVoltage/100*MinCur; if(minPowerpushButton_Start->setText(tr("启 动")); ui->pushButton_Stop->setText(tr("停 止")); ui->pushButton_Start->setEnabled(true); ui->pushButton_Stop->setEnabled(false); #if PageType == FBO48CT || PageType == FBI48CT if(ui->pushButton_zch->isVisible()) ui->pushButton_zch->setEnabled(true); #endif if(ui->comboBox_Type->currentIndex() == 0) { ui->edit_Setmode->setEnabled(true);ui->edit_Setmode->setStyleSheet("color:black"); #if PageType == FBO48CT ui->edit_workmode->setEnabled(true);ui->edit_workmode->setStyleSheet("color:black"); #endif #if PageType == FBO48CT || PageType == FBI48CT ui->edit_acstop->setEnabled(true);ui->edit_acstop->setStyleSheet("color:black"); #endif } else { ui->edit_Setmode->setEnabled(false);ui->edit_Setmode->setStyleSheet("color:gray"); #if PageType == FBO48CT ui->edit_workmode->setEnabled(false);ui->edit_workmode->setStyleSheet("color:gray"); #endif #if PageType == FBO48CT || PageType == FBI48CT ui->edit_acstop->setEnabled(false);ui->edit_acstop->setStyleSheet("color:gray"); #endif } break; case Paused_Dischg: case Paused_charge:{ ui->pushButton_Start->setText(tr("启 动")); ui->pushButton_Stop->setText(tr("停 止")); ui->pushButton_Start->setEnabled(true); ui->pushButton_Stop->setEnabled(true); #if PageType == FBO48CT || PageType == FBI48CT if(ui->pushButton_zch->isVisible()) ui->pushButton_zch->setEnabled(true); #endif ui->edit_Setmode->setEnabled(false);ui->edit_Setmode->setStyleSheet("color:gray"); #if PageType == FBO48CT ui->edit_workmode->setEnabled(false);ui->edit_workmode->setStyleSheet("color:gray"); #endif #if PageType == FBO48CT || PageType == FBI48CT ui->edit_acstop->setEnabled(false);ui->edit_acstop->setStyleSheet("color:gray"); #endif } break; case Discharging:{ if_update = true; ui->pushButton_Start->setText(tr("启 动")); ui->pushButton_Stop->setText(tr("暂 停")); ui->pushButton_Start->setEnabled(false); ui->pushButton_Stop->setEnabled(true); ui->edit_Setmode->setEnabled(false);ui->edit_Setmode->setStyleSheet("color:gray"); #if PageType == FBO48CT ui->edit_workmode->setEnabled(false);ui->edit_workmode->setStyleSheet("color:gray"); #endif #if PageType == FBO48CT || PageType == FBI48CT ui->edit_acstop->setEnabled(false);ui->edit_acstop->setStyleSheet("color:gray"); #endif } break; case Charging:{ if_update = true; ui->pushButton_Start->setText(tr("启 动")); ui->pushButton_Stop->setText(tr("暂 停")); ui->pushButton_Start->setEnabled(false); ui->pushButton_Stop->setEnabled(true); ui->edit_Setmode->setEnabled(false);ui->edit_Setmode->setStyleSheet("color:gray"); #if PageType == FBO48CT ui->edit_workmode->setEnabled(false);ui->edit_workmode->setStyleSheet("color:gray"); #endif #if PageType == FBO48CT || PageType == FBI48CT ui->edit_acstop->setEnabled(false);ui->edit_acstop->setStyleSheet("color:gray"); #endif #if CONTROL_ZC if(alarm == CPSmallCharging) { ui->pushButton_Start->setText(tr("限 流")); ui->pushButton_Start->setEnabled(false); ui->pushButton_zch->setEnabled(true); } else if(alarm == CPLargeCharging) { ui->pushButton_Start->setText(tr("限 流")); ui->pushButton_Start->setEnabled(true); ui->pushButton_zch->setEnabled(false); } else if(alarm == CPNullCharging) { ui->pushButton_Start->setText(tr("启 动")); ui->pushButton_Start->setEnabled(false); ui->pushButton_zch->setEnabled(false); } #endif } break; case WaitForCharging: ui->pushButton_Start->setText(tr("启 动")); ui->pushButton_Stop->setText(tr("暂 停")); ui->pushButton_Start->setEnabled(false); ui->pushButton_Stop->setEnabled(false); break; } } if(!if_update){ ui->pushButton_Start->setEnabled(false); ui->pushButton_Stop->setEnabled(false); } //---------------下限单体---------------- if(state == WorkStopped || state == WaitForCharging) { if((!isCloseBeep || state==WorkStopped)&&(!if_useDroplabel)) ui->label_DropIndex->setText(""); if(if_exec) if_exec=false; //关闭异常告警 } else { if(!if_useDroplabel) { if(drop == 0) { ui->label_DropIndex->setText(""); } else { QString temp; temp.sprintf("%03d/%d",(drop-1)%test_param_xml.mon_number + 1,(drop-1)/test_param_xml.mon_number + 1); ui->label_DropIndex->setText(tr("#")+temp+tr(" 单体异常！")); // ui->label_DropIndex->setText(("#")+QString::number(drop)+tr(" 单体模块异常！")); is_start_alarm_time = 1; } } if(((alarm == WPPOWERBREAKSTOP)&&(ui->comboBox_Type->currentIndex() == 0))|| ((alarm == CPPOWERBREAKSTOP)&&(ui->comboBox_Type->currentIndex() == 1))) { is_start_alarm_time = 1; } if(is_start_alarm_time) { if(!if_exec) if_exec=true; } else { if(if_exec) if_exec=false; } } if(ui->comboBox_Type->currentIndex() == 0) { if(alarmlabel_AlarmState->setText(tr("当前状态：")+stopType.at(alarm)); else ui->label_AlarmState->setText(tr("当前状态：未知")); } else if(ui->comboBox_Type->currentIndex() == 1) { if(alarmlabel_AlarmState->setText(tr("当前状态：")+chargeType.at(alarm)); else ui->label_AlarmState->setText(tr("当前状态：未知")); } } void Working_Page::setDCdataTable() { #if PageType==FBI48CT quint8 dcdc_count = work_thread->get_DCDC_count(); if(dcdc_count>0 && dcdc_count<=4) { dcdc_count = dcdc_count+1; for(int i=1;itableWidget_3->item(0,i)->setText(QString::number(i)); ui->tableWidget_3->item(1,i)->setText(QString::number((float)work_thread->localData.dcdc_data[i-1].DC_Vol/100,'f',2)); ui->tableWidget_3->item(2,i)->setText(QString::number((float)work_thread->localData.dcdc_data[i-1].DC_Cur/100,'f',2)); // ui->tableWidget_2->item(3,i)->setText("0x"+ // QString::number(work_thread->localData.dcdc_data[i-1].DC_Alarm,16).toUpper().rightJustified(2,QChar('0'))); // ui->tableWidget_2->item(4,i)->setText(QString::number(work_thread->localData.dcdc_data[i-1].TX)); // ui->tableWidget_2->item(5,i)->setText(QString::number(work_thread->localData.dcdc_data[i-1].RX)); // if(work_thread->localData.dcdc_data[i-1].DC_Alarm) // qDebug("%x",work_thread->localData.dcdc_data[i-1].DC_Alarm); QString msg = ""; int count = 0; if(work_thread->localData.dcdc_data[i-1].DC_Alarm & 0x02) { msg+="Fan ";count++; } // if(work_thread->localData.dcdc_data[i-1].DC_Alarm & 0x20) // { // msg+="0x20 ";count++; // } if(work_thread->localData.dcdc_data[i-1].DC_Alarm & 0x40 && count <2) { msg+="HiTMP ";count++; } if(work_thread->localData.dcdc_data[i-1].DC_Alarm & 0x100 && count <2) { msg+="HVSD ";count++; } if(work_thread->localData.dcdc_data[i-1].DC_Alarm & 0x400 && count <2) { msg+="PoL ";count++; } if(work_thread->localData.dcdc_data[i-1].DC_Alarm & 0x4000 && count <2) { msg+="SD ";count++; } if(work_thread->localData.dcdc_data[i-1].DC_Alarm & 0x8000 && count <2) { msg+="TmpERR"; } if(msg == "") { msg ="-"; } ui->tableWidget_3->item(3,i)->setText(msg); } } #endif } void Working_Page::setIconTime() { QDateTime time = QDateTime::currentDateTime();//获取系统现在的时间 QString str = time.toString("yyyy-MM-dd hh:mm:ss"); //设置显示格式 ui->label_Time->setText(str); if(work_thread->iconState.monomerState){ if(work_thread->get_mon_source()==MONO_TYPE_WIRED) { ui->label_MON->setStyleSheet("image: url(:/new/prefix1/1.png);"); } else { if(mon_use_type == 2) ui->label_MON->setStyleSheet("border-image: url(:/new/prefix1/lora_mon.png);"); else ui->label_MON->setStyleSheet("border-image: url(:/new/prefix1/mon.png);"); } } else ui->label_MON->setStyleSheet(""); if(work_thread->iconState.usbState) ui->label_USB->setPixmap(QPixmap(":new/prefix1/usb.png")); else ui->label_USB->setPixmap(QPixmap("")); if(work_thread->iconState.wifiState) { ui->label_WIFI->setStyleSheet("border-image: url(:/new/prefix1/wificonnect.png);"); ui->pushButton_Start->setVisible(false); ui->pushButton_Stop->setVisible(false); #if (PageType == FBO48CT || PageType == FBI48CT)&&CONTROL_ZC ui->pushButton_zch->setVisible(false); #endif ui->comboBox_Type->setEnabled(false); } else { if(ui->label_WIFI->styleSheet()!="" && work_thread->localData.SysWorkState == WorkStopped) { ui->comboBox_Type->setEnabled(true); } ui->label_WIFI->setStyleSheet(""); ui->pushButton_Start->setVisible(true); ui->pushButton_Stop->setVisible(true); #if (PageType == FBO48CT) || PageType == FBI48CT if((test_param_xml.test_mode == ONline_working)&& (ui->comboBox_Type->currentIndex() == 1)&& CONTROL_ZC) { ui->pushButton_zch->setVisible(true); } else{ ui->pushButton_zch->setVisible(false); } #endif } } void Working_Page::setParamEnabled(bool enabled) { #if PageType == FBO48CT ui->edit_workmode->setEnabled(enabled); ui->edit_onlinevol_lowlimit->setEnabled(enabled); #endif #if PageType == FBI48CT ui->edit_SetBoosterCeiling->setEnabled(enabled); #endif #if PageType == FBO48CT || PageType == FBI48CT ui->edit_acstop->setEnabled(enabled); #endif ui->edit_SetCur->setEnabled(enabled); ui->edit_SetGroupLow->setEnabled(enabled); ui->edit_SetMonLow->setEnabled(enabled); ui->edit_SetLowNum->setEnabled(enabled); ui->edit_SetTime->setEnabled(enabled); ui->edit_SetCap->setEnabled(enabled); ui->edit_HourRate->setEnabled(enabled); ui->edit_Setmode->setEnabled(enabled); if(enabled)//放电界面 { #if PageType == FBO48CT ui->edit_workmode->setStyleSheet("color:black"); ui->edit_onlinevol_lowlimit->setStyleSheet("color:black"); #endif #if PageType == FBI48CT ui->edit_SetBoosterCeiling->setStyleSheet("color:black"); #endif #if PageType == FBO48CT || PageType == FBI48CT ui->edit_acstop->setStyleSheet("color:black"); #endif ui->edit_SetCur->setStyleSheet("color:black"); ui->edit_SetGroupLow->setStyleSheet("color:black"); ui->edit_SetMonLow->setStyleSheet("color:black"); ui->edit_SetLowNum->setStyleSheet("color:black"); ui->edit_SetTime->setStyleSheet("color:black"); ui->edit_SetCap->setStyleSheet("color:black"); ui->edit_HourRate->setStyleSheet("color:black"); ui->label_TestCur->setText(tr("放电电流：")); ui->label_TestCap->setText(tr("已放容量：")); ui->edit_Setmode->setStyleSheet("color:black"); if(test_param_xml.discharge_mode == DISCHARGE_CURRENT){ ui->edit_HourRate->setEnabled(true);ui->edit_HourRate->setStyleSheet("color:black"); } else { ui->edit_HourRate->setEnabled(false);ui->edit_HourRate->setStyleSheet("color:gray"); } } else { #if PageType == FBO48CT ui->edit_workmode->setStyleSheet("color:gray"); ui->edit_onlinevol_lowlimit->setStyleSheet("color:gray"); #endif #if PageType == FBI48CT ui->edit_SetBoosterCeiling->setStyleSheet("color:gray"); #endif #if PageType == FBO48CT || PageType == FBI48CT ui->edit_acstop->setStyleSheet("color:gray"); #endif ui->edit_SetCur->setStyleSheet("color:gray"); ui->edit_SetGroupLow->setStyleSheet("color:gray"); ui->edit_SetMonLow->setStyleSheet("color:gray"); ui->edit_SetLowNum->setStyleSheet("color:gray"); ui->edit_SetTime->setStyleSheet("color:gray"); ui->edit_SetCap->setStyleSheet("color:gray"); ui->edit_HourRate->setStyleSheet("color:gray"); ui->edit_Setmode->setStyleSheet("color:gray"); ui->edit_Setmode->setEnabled(false); ui->label_TestCur->setText(tr("充电电流：")); ui->label_TestCap->setText(tr("已充容量：")); } } void Working_Page::cleanMonomerTable() { for(int i=0;i<6;i++) { for(int j=0;j<4;j++) { ui->tableWidget->item(i,j)->setText(""); } } } void Working_Page::setMonomerTable() { cleanMonomerTable(); if(test_param_xml.mon_number != 0) { //每组单体数量 mon_table.monNum = test_param_xml.mon_number; //单体组数 mon_table.monGroupNum = test_param_xml.group_number; //每组页数 if(mon_table.monNum%24 == 0) mon_table.monPageNum = mon_table.monNum/24; else mon_table.monPageNum = mon_table.monNum/24+1; //当前页数和当前组数 if(mon_table.pageIndex%mon_table.monPageNum == 0)//当前是每组最后一页 { mon_table.monPageIndex = mon_table.monPageNum; mon_table.monGroupIndex = mon_table.pageIndex/mon_table.monPageNum; if(mon_table.monNum%24 == 0) //单体数是24倍数 { for(int i=0;i<6;i++) { for(int j=0;j<4;j++) { int current_index = (mon_table.monGroupIndex-1)* mon_table.monNum+(mon_table.monPageIndex-1)*24+i*4+j; tableItem = ui->tableWidget->item(i,j); tableItem->setText(format_monomer((mon_table.monPageIndex-1)*24+i*4+j, fbodata.SingleVol[current_index])); tableItem->setTextAlignment(0x0084); tableItem->setTextColor(QColor(255,255,255)); if((fbodata.SingleVol[current_index] == lcldata.SMaxVol[mon_table.monGroupIndex-1])&& ClassXML::getMonomerVol(work_thread->get_mon_source(),fbodata.SingleVol[current_index])>0) { tableItem->setTextColor(QColor(0,255,127)); } if(fbodata.SingleVol[current_index] == lcldata.SMinVol[mon_table.monGroupIndex-1]) { tableItem->setTextColor(QColor(255,69,78)); } } } } else //单体不是24的倍数 { for(int i=0;i<6;i++) { for(int j=0;j<4;j++) { int current_index = (mon_table.monGroupIndex-1)* mon_table.monNum+(mon_table.monPageIndex-1)*24+i*4+j; if(i*4+jtableWidget->item(i,j); tableItem->setText(format_monomer((mon_table.monPageIndex-1)*24+i*4+j, fbodata.SingleVol[current_index])); tableItem->setTextAlignment(0x0084); tableItem->setTextColor(QColor(255,255,255)); if((fbodata.SingleVol[current_index] == lcldata.SMaxVol[mon_table.monGroupIndex-1])&& ClassXML::getMonomerVol(work_thread->get_mon_source(),fbodata.SingleVol[current_index])>0) { tableItem->setTextColor(QColor(0,255,127)); } if(fbodata.SingleVol[current_index] == lcldata.SMinVol[mon_table.monGroupIndex-1]) { tableItem->setTextColor(QColor(255,69,78)); } //tableWidget->setItem(i,j,tableItem); } } } } } else //当前不是最后一页 { mon_table.monPageIndex = mon_table.pageIndex%mon_table.monPageNum; mon_table.monGroupIndex = (mon_table.pageIndex/mon_table.monPageNum)+1; for(int i=0;i<6;i++) { for(int j=0;j<4;j++) { int current_index = (mon_table.monGroupIndex-1)* mon_table.monNum+(mon_table.monPageIndex-1)*24+i*4+j; tableItem = ui->tableWidget->item(i,j); tableItem->setText(format_monomer((mon_table.monPageIndex-1)*24+i*4+j, fbodata.SingleVol[current_index])); tableItem->setTextAlignment(0x0084); tableItem->setTextColor(QColor(255,255,255)); if((fbodata.SingleVol[current_index] == lcldata.SMaxVol[mon_table.monGroupIndex-1])&& ClassXML::getMonomerVol(work_thread->get_mon_source(),fbodata.SingleVol[current_index])>0) { tableItem->setTextColor(QColor(0,255,127)); } if(fbodata.SingleVol[current_index] == lcldata.SMinVol[mon_table.monGroupIndex-1]) { tableItem->setTextColor(QColor(255,69,78)); } //tableWidget->setItem(i,j,tableItem); } } } ui->label_Group->setText(tr("组：")+QString::number(mon_table.monGroupIndex)+"/"+ QString::number(mon_table.monGroupNum)); ui->label_MaxMon->setText(tr("最高：")+format_monomer( lcldata.SMaxIndex[mon_table.monGroupIndex-1], lcldata.SMaxVol[mon_table.monGroupIndex-1])); ui->label_MinMon->setText(tr("最低：")+format_monomer( lcldata.SMinIndex[mon_table.monGroupIndex-1], lcldata.SMinVol[mon_table.monGroupIndex-1])); } } void Working_Page::initMonomerChart() { bars1 = new QCPBars(ui->chartWidget1->xAxis,ui->chartWidget1->yAxis); bars1->setAntialiased(false); bars1->setStackingGap(1); bars1->setName(NULL); bars1->setPen(QPen(QColor(255, 255, 255).lighter(130))); bars1->setBrush(QColor(255, 255, 255)); bars2 = new QCPBars(ui->chartWidget1->xAxis,ui->chartWidget1->yAxis); bars2->setAntialiased(false); bars2->setStackingGap(1); bars2->setName(NULL); bars2->setPen(QPen(QColor(0, 255, 127).lighter(130))); bars2->setBrush(QColor(0, 255, 127)); bars3 = new QCPBars(ui->chartWidget1->xAxis,ui->chartWidget1->yAxis); bars3->setAntialiased(false); bars3->setStackingGap(1); bars3->setName(NULL); bars3->setPen(QPen(QColor(255, 69, 78).lighter(130))); bars3->setBrush(QColor(255, 69, 78)); bars4 = new QCPBars(ui->chartWidget1->xAxis,ui->chartWidget1->yAxis); bars4->setAntialiased(false); bars4->setStackingGap(1); bars4->setName(NULL); bars4->setPen(QPen(QColor(240, 240, 0).lighter(130))); bars4->setBrush(QColor(240, 240, 0)); bars4->moveAbove(bars1); // set transparent background gradient: QLinearGradient gradient(0,0,0,0); gradient.setColorAt(0, QColor(0,0,0,0)); ui->chartWidget1->setBackground(QBrush(gradient)); // create empty bar chart objects: //bars4->moveBelow(bars1); ui->chartWidget1->xAxis->setSubTicks(false);//是否显示小刻度 ui->chartWidget1->xAxis->setTickLength(0, 4);//大刻度高度（内，外） ui->chartWidget1->xAxis->setRange(0, 25);//坐标轴范围 ui->chartWidget1->xAxis->setBasePen(QPen(Qt::white));//基础线条画笔 ui->chartWidget1->xAxis->setTickPen(QPen(Qt::white));//文本画笔 ui->chartWidget1->xAxis->grid()->setVisible(false);//网格可见 ui->chartWidget1->xAxis->grid()->setPen(QPen(QColor(130, 130, 130), 0, Qt::DotLine)); ui->chartWidget1->xAxis->setTickLabelColor(Qt::white);//文本颜色 ui->chartWidget1->xAxis->setLabelColor(Qt::white);//坐标轴名称颜色 // prepare y axis: //ui->chartWidget1->yAxis->setRange(0, 15); ui->chartWidget1->yAxis->setPadding(5); //ui->chartWidget1->yAxis->setLabel("vol"); ui->chartWidget1->yAxis->setBasePen(QPen(Qt::white)); ui->chartWidget1->yAxis->setTickPen(QPen(Qt::white)); ui->chartWidget1->yAxis->setSubTickPen(QPen(Qt::white)); ui->chartWidget1->yAxis->grid()->setSubGridVisible(false); ui->chartWidget1->yAxis->setTickLabelColor(Qt::white); ui->chartWidget1->yAxis->setLabelColor(Qt::white); ui->chartWidget1->yAxis->grid()->setPen(QPen(QColor(130, 130, 130), 0, Qt::SolidLine)); ui->chartWidget1->yAxis->grid()->setSubGridPen(QPen(QColor(130, 130, 130), 0, Qt::DotLine)); // setup legend: ui->chartWidget1->legend->setVisible(false);//柱状图中柱状说明 ui->chartWidget1->axisRect()->insetLayout()->setInsetAlignment(0, Qt::AlignTop|Qt::AlignHCenter); ui->chartWidget1->legend->setBrush(QColor(255, 255, 255, 100)); ui->chartWidget1->legend->setBorderPen(Qt::NoPen); QFont legendFont = font(); legendFont.setPointSize(18); ui->chartWidget1->legend->setFont(legendFont); ui->chartWidget1->yAxis->setLabelFont(legendFont); ui->chartWidget1->xAxis->setTickLabelFont(legendFont); ui->chartWidget1->yAxis->setTickLabelFont(legendFont); //ui->chartWidget1->setInteractions(QCP::iRangeDrag | QCP::iRangeZoom);//移动缩放 } void Working_Page::setMonomerChart() { QVector index(24); //X轴索引 QVector labels(24); //X轴显示 QVector value(24); //Y轴值 QVector valuebefore(24);//测试前Y轴值 QVector maxIndex; //最大单体索引 QVector maxValue; //最大单体值 QVector minIndex; //最小单体索引 QVector minValue; //最小单体值 QVector workValue(24); //开始测试时电压差 if(test_param_xml.mon_number != 0) { double curr_vol=0; double before_vol=0; if(mon_table.pageIndex%mon_table.monPageNum == 0)//当前是每组最后一页 { if(mon_table.monNum%24 == 0) //单体数是24倍数 { for(int i=0;i<24;i++) { int current_index = (mon_table.monGroupIndex-1)* mon_table.monNum+(mon_table.monPageIndex-1)*24+i; curr_vol = (float)ClassXML::getMonomerVol(work_thread->get_mon_source(),fbodata.SingleVol[current_index])/1000; before_vol = (float)ClassXML::getMonomerVol(work_thread->get_mon_source(),SingleVolBeforeTest[current_index])/1000; index[i] = i+1; if((i+1)%4 == 0) { labels[i] = format_monID((mon_table.monPageIndex-1)*24+i+1); } if(lcldata.SysWorkState) //非停止状态显示压差 { if(curr_vol >= before_vol && before_vol >= 0)//电压上升 { value[i] = before_vol; valuebefore[i] = curr_vol; workValue[i] = (curr_vol-before_vol); } else//电压下降 { value[i] = curr_vol; valuebefore[i] = before_vol; workValue[i] = (before_vol-curr_vol); } } else //停止状态只显示当前电压 { value[i] = curr_vol; workValue[i] = 0; valuebefore[i] = 0; } //------------找出最大最小单体------------ if(fbodata.SingleVol[current_index] == lcldata.SMaxVol[mon_table.monGroupIndex-1]) { maxIndex.append(i+1); maxValue.append((float)ClassXML::getMonomerVol(work_thread->get_mon_source(),lcldata.SMaxVol[mon_table.monGroupIndex-1])/1000); } if(fbodata.SingleVol[current_index] == lcldata.SMinVol[mon_table.monGroupIndex-1]) { minIndex.append(i+1); minValue.append((float)ClassXML::getMonomerVol(work_thread->get_mon_source(),lcldata.SMinVol[mon_table.monGroupIndex-1])/1000); } } } else { int lastnum = mon_table.monNum%24; for(int i=0;iget_mon_source(),fbodata.SingleVol[current_index])/1000; before_vol = (float)ClassXML::getMonomerVol(work_thread->get_mon_source(),SingleVolBeforeTest[current_index])/1000; index[i] = i+1; if((i+1)%4 == 0) { labels[i] = format_monID((mon_table.monPageIndex-1)*24+i+1); } if(lcldata.SysWorkState) //非停止状态显示压差 { if(curr_vol >= before_vol && before_vol >= 0)//电压上升 { value[i] = before_vol; valuebefore[i] = curr_vol; workValue[i] = (curr_vol-before_vol); } else//电压下降 { value[i] = curr_vol; valuebefore[i] = before_vol; workValue[i] = (before_vol-curr_vol); } } else //停止状态只显示当前电压 { value[i] = curr_vol; workValue[i] = 0; valuebefore[i] = 0; } //------------找出最大最小单体------------ if(fbodata.SingleVol[current_index] == lcldata.SMaxVol[mon_table.monGroupIndex-1]) { maxIndex.append(i+1); maxValue.append((float)ClassXML::getMonomerVol(work_thread->get_mon_source(),lcldata.SMaxVol[mon_table.monGroupIndex-1])/1000); } if(fbodata.SingleVol[current_index] == lcldata.SMinVol[mon_table.monGroupIndex-1]) { minIndex.append(i+1); minValue.append((float)ClassXML::getMonomerVol(work_thread->get_mon_source(),lcldata.SMinVol[mon_table.monGroupIndex-1])/1000); } } if(lastnum%4!=0) { for(int i=lastnum;i<(4-lastnum%4)+lastnum;i++) { index[i] = i+1; if((i+1)%4 == 0) { labels[i] = format_monID((mon_table.monPageIndex-1)*24+i+1); } } } } } else { for(int i=0;i<24;i++) { int current_index = (mon_table.monGroupIndex-1)* mon_table.monNum+(mon_table.monPageIndex-1)*24+i; curr_vol = (float)ClassXML::getMonomerVol(work_thread->get_mon_source(),fbodata.SingleVol[current_index])/1000; before_vol = (float)ClassXML::getMonomerVol(work_thread->get_mon_source(),SingleVolBeforeTest[current_index])/1000; index[i] = i+1; if((i+1)%4 == 0) { labels[i] = format_monID((mon_table.monPageIndex-1)*24+i+1); } if(lcldata.SysWorkState) //非停止状态显示压差 { if(curr_vol >= before_vol && before_vol >= 0)//电压上升 { value[i] = before_vol; valuebefore[i] = curr_vol; workValue[i] = (curr_vol-before_vol); } else//电压下降 { value[i] = curr_vol; valuebefore[i] = before_vol; workValue[i] = (before_vol-curr_vol); } } else //停止状态只显示当前电压 { value[i] = curr_vol; workValue[i] = 0; valuebefore[i] = 0; } //------------找出最大最小单体------------ if(fbodata.SingleVol[current_index] == lcldata.SMaxVol[mon_table.monGroupIndex-1]) { maxIndex.append(i+1); maxValue.append((float)ClassXML::getMonomerVol(work_thread->get_mon_source(),lcldata.SMaxVol[mon_table.monGroupIndex-1])/1000); } if(fbodata.SingleVol[current_index] == lcldata.SMinVol[mon_table.monGroupIndex-1]) { minIndex.append(i+1); minValue.append((float)ClassXML::getMonomerVol(work_thread->get_mon_source(),lcldata.SMinVol[mon_table.monGroupIndex-1])/1000); } } } //x,index // QSharedPointer textTicker(new QCPAxisTickerText); // textTicker->addTicks(index, labels); // ui->chartWidget1->xAxis->setTicker(textTicker); // bars1->setData(index,value); // bars2->setData(maxIndex,maxValue); // bars3->setData(minIndex,minValue); // bars4->setData(index,workValue); // ui->chartWidget1->yAxis->setRange(0, get_top_barmon(value,valuebefore,lcldata.SysWorkState)); // ui->chartWidget1->replot(); ui->label_GroupChart->setText(tr("组：")+QString::number(mon_table.monGroupIndex)+"/"+ QString::number(mon_table.monGroupNum)); ui->label_MaxMonChart->setText(tr("最高：")+format_monomer( lcldata.SMaxIndex[mon_table.monGroupIndex-1], lcldata.SMaxVol[mon_table.monGroupIndex-1])); ui->label_MinMonChart->setText(tr("最低：")+format_monomer( lcldata.SMinIndex[mon_table.monGroupIndex-1], lcldata.SMinVol[mon_table.monGroupIndex-1])); } QSharedPointer textTicker(new QCPAxisTickerText); textTicker->addTicks(index, labels); ui->chartWidget1->xAxis->setTicker(textTicker); bars1->setData(index,value); bars2->setData(maxIndex,maxValue); bars3->setData(minIndex,minValue); bars4->setData(index,workValue); ui->chartWidget1->yAxis->setRange(0, get_top_barmon(value,valuebefore,lcldata.SysWorkState)); ui->chartWidget1->replot(); } void Working_Page::setMonomerBtnState(void) { if(mon_table.pageIndex == 1) { if(mon_table.monPageNum==1 && mon_table.monGroupNum==1) { ui->pushButton_MonLast->setEnabled(false); ui->pushButton_MonNext->setEnabled(false); ui->pushButton_MonChartLast->setEnabled(false); ui->pushButton_MonChartNext->setEnabled(false); } else { ui->pushButton_MonLast->setEnabled(false); ui->pushButton_MonNext->setEnabled(true); ui->pushButton_MonChartLast->setEnabled(false); ui->pushButton_MonChartNext->setEnabled(true); } } else { if(mon_table.pageIndex==mon_table.monPageNum*mon_table.monGroupNum) { ui->pushButton_MonLast->setEnabled(true); ui->pushButton_MonNext->setEnabled(false); ui->pushButton_MonChartLast->setEnabled(true); ui->pushButton_MonChartNext->setEnabled(false); } else { ui->pushButton_MonLast->setEnabled(true); ui->pushButton_MonNext->setEnabled(true); ui->pushButton_MonChartLast->setEnabled(true); ui->pushButton_MonChartNext->setEnabled(true); } } } //********************历史曲线*********************** void Working_Page::initTestChart() { QLinearGradient gradient(0,0,0,0); gradient.setColorAt(0, QColor(0,0,0,0)); ui->chartWidget2->setBackground(QBrush(gradient)); // prepare x axis: ui->chartWidget2->xAxis->setSubTicks(false);//是否显示小刻度 ui->chartWidget2->xAxis->setBasePen(QPen(Qt::white));//基础线条画笔 ui->chartWidget2->xAxis->setTickPen(QPen(Qt::white));//文本画笔 ui->chartWidget2->xAxis->setTickLabelColor(Qt::white);//文本颜色 ui->chartWidget2->xAxis->setLabelColor(Qt::white);//坐标轴名称颜色 ui->chartWidget2->xAxis->setRange(0, 5); // prepare y axis: ui->chartWidget2->yAxis->setRange(0, 50); ui->chartWidget2->yAxis->setLabel(" "); ui->label_SetLabel->setText("V"); ui->chartWidget2->yAxis->setBasePen(QPen(Qt::white)); ui->chartWidget2->yAxis->setTickPen(QPen(Qt::white)); ui->chartWidget2->yAxis->setSubTickPen(QPen(Qt::white)); ui->chartWidget2->yAxis->setTickLabelColor(Qt::white); ui->chartWidget2->yAxis->setLabelColor(Qt::white); ui->chartWidget2->clearGraphs(); ui->chartWidget2->addGraph(); ui->chartWidget2->graph()->setPen(QPen(Qt::green,3)); QSharedPointer timeTicker(new QCPAxisTickerTime); timeTicker->setTimeFormat("%h:%m:%s"); ui->chartWidget2->xAxis->setTicker(timeTicker); QFont legendFont = font(); legendFont.setPointSize(18); ui->chartWidget2->yAxis->setLabelFont(legendFont); ui->chartWidget2->xAxis->setTickLabelFont(legendFont); ui->chartWidget2->yAxis->setTickLabelFont(legendFont); ui->chartWidget2->replot(); } void Working_Page::updateVolChart() { if(vector_groupvol.count()<=0 || vector_second.count()<=0) return; quint8 workstate = work_thread->localData.SysWorkState; QVector x,y; int volcount = vector_groupvol.count(); int volsecond = work_thread->fboData.m_TestTime.hour*3600+ work_thread->fboData.m_TestTime.minute*60+ work_thread->fboData.m_TestTime.second; if(workstate == Discharging || workstate == Charging){ x.resize(volcount+1);y.resize(volcount+1); for(int i=0;ichartWidget2->graph()->setData(x, y); ui->chartWidget2->xAxis->setRange(0, volsecond*1.2); ui->chartWidget2->yAxis->setRange(0, get_top_chart(y)); ui->chartWidget2->replot(); } void Working_Page::updateCurChart() { if(vector_cur.count()<=0 || vector_second.count()<=0) return; //电流曲线 加入 当前电流 int curcount = vector_cur.count(); QVector x(curcount+1) , y(curcount+1); for(int i=0;ifboData.m_TestTime.hour*3600+ work_thread->fboData.m_TestTime.minute*60+ work_thread->fboData.m_TestTime.second; if(work_thread->localData.SysWorkState == Discharging || work_thread->localData.SysWorkState == Charging){ x[curcount] = cursecond; y[curcount] = (double)work_thread->fboData.SumCurrent/10; } else{ x[curcount] = cursecond+0.0001; y[curcount] = 0; } ui->chartWidget2->graph()->setData(x, y); ui->chartWidget2->xAxis->setRange(0, cursecond*1.2); ui->chartWidget2->yAxis->setRange(0, get_top_chart(y)); ui->chartWidget2->replot(); } void Working_Page::updateCapChart() { if(vector_cap.count()<=0 || vector_second.count()<=0) return; quint8 workstate = work_thread->localData.SysWorkState; QVector x,y; int capcount = vector_cap.count(); int capsecond = work_thread->fboData.m_TestTime.hour*3600+ work_thread->fboData.m_TestTime.minute*60+ work_thread->fboData.m_TestTime.second; if(workstate == Discharging || workstate == Charging){ x.resize(capcount+1);y.resize(capcount+1); for(int i=0;ichartWidget2->graph()->setData(x, y); ui->chartWidget2->xAxis->setRange(0, capsecond*1.2); ui->chartWidget2->yAxis->setRange(0, get_top_chart(y)); //ui->chartWidget2->yAxis->setRange(0, test_param_xml.nominal_cap); ui->chartWidget2->replot(); } void Working_Page::updateMonChart(int index) { if(index<0 || index>=GmonNum) return; int nowindex = (CBGroupIndex-1)*GmonNum+index; if(vector_mon.count()<=0 || vector_second.count()<=0) return; QVector x,y; quint8 workstate = work_thread->localData.SysWorkState; int monsecond = work_thread->fboData.m_TestTime.hour*3600+ work_thread->fboData.m_TestTime.minute*60+ work_thread->fboData.m_TestTime.second; int moncount = vector_mon.at(nowindex).count(); if(workstate == Discharging || workstate == Charging){ x.resize(moncount+1);y.resize(moncount+1); for(int i=0;iget_mon_source(),vector_mon.at(nowindex).at(i))/1000; } x[moncount] = monsecond; y[moncount] = (double)ClassXML::getMonomerVol(work_thread->get_mon_source(),fbodata.SingleVol[nowindex])/1000; } else { x.resize(moncount);y.resize(moncount); for(int i=0;iget_mon_source(),vector_mon.at(nowindex).at(i))/1000; } } ui->chartWidget2->graph()->setData(x, y); ui->chartWidget2->xAxis->setRange(0, monsecond*1.2); ui->chartWidget2->yAxis->setRange(0, get_top_chart(y)); ui->chartWidget2->replot(); } void Working_Page::TypeComboBoxChangeSlot(int index) { work_thread->localData.Interface=index+1; switch(index) { case 0://放电 { setParamEnabled(true); work_thread->initWorkPageShow(); break; } case 1: { setParamEnabled(false); work_thread->initWorkPageShow(); break; } } } void Working_Page::TestChartComboBoxChangeSlot(int index) { switch(index) { case 0: { ui->edit_mon_id->setVisible(false); ui->pushButton_MonLast_Test->setVisible(false); ui->pushButton_MonNext_Test->setVisible(false); ui->comboBox_GroupM->setVisible(false); ui->label_SetLabel->setText("V"); ui->chartWidget2->graph()->setPen(QPen(Qt::green,3)); ui->chartWidget2->graph()->setBrush(Qt::transparent); ReadDataSlot(); } break; case 1: { ui->edit_mon_id->setVisible(false); ui->pushButton_MonLast_Test->setVisible(false); ui->pushButton_MonNext_Test->setVisible(false); ui->comboBox_GroupM->setVisible(false); ui->label_SetLabel->setText("A"); ui->chartWidget2->graph()->setPen(QPen(Qt::red,3)); ui->chartWidget2->graph()->setBrush(Qt::transparent); ReadDataSlot(); } break; case 2: ui->edit_mon_id->setVisible(false); ui->pushButton_MonLast_Test->setVisible(false); ui->pushButton_MonNext_Test->setVisible(false); ui->comboBox_GroupM->setVisible(false); ui->label_SetLabel->setText("AH"); ui->chartWidget2->graph()->setPen(QPen(Qt::yellow,3)); ui->chartWidget2->graph()->setBrush(Qt::yellow); ReadDataSlot(); break; case 3: ui->edit_mon_id->setVisible(true); ui->pushButton_MonLast_Test->setVisible(true); ui->pushButton_MonNext_Test->setVisible(true); if(test_param_xml.group_number != 1) ui->comboBox_GroupM->setVisible(true); ui->label_SetLabel->setText("V"); ui->chartWidget2->graph()->setPen(QPen(Qt::green,3)); ui->chartWidget2->graph()->setBrush(Qt::transparent); ReadDataSlot(); break; } } void Working_Page::GroupMComboBoxChangeSlot(int index) { if(index+1<=4 && index >=0) { CBGroupIndex = index+1; } updateMonChart(chartMonID-1); } //************************************************** bool Working_Page::setEditInput(Custom_LineEdit *edit, int space, float min, float max, int floatNum) { edit->setStyleSheet("color:red"); KeyBoard_Num keyboard(this,INPUT_DATA,work_thread); if(!space) keyboard.setGeometry(230,130,300,350); else keyboard.setGeometry(485,130,300,350); keyboard.execKeyboard(); edit->setStyleSheet("color:black"); DATA_KB_RTN kbdata = keyboard.get_kb_data(); if(kbdata.If_OK) { float input = kbdata.set_text.toFloat(); if(input>=min && input<=max) { edit->setText(QString::number(input,'f',floatNum)); } else { popBox(tr("当前输入范围：")+QString::number(min,'f',floatNum)+("~")+QString::number(max,'f',floatNum)); } } return kbdata.If_OK; } void Working_Page::setChartEditInput(Custom_LineEdit *edit,int min, int max) { edit->setStyleSheet("color:red"); KeyBoard_Num keyboard(this,INPUT_ALLNO,work_thread); keyboard.setGeometry(490,105,300,350); keyboard.execKeyboard(); edit->setStyleSheet("color:black"); DATA_KB_RTN kbdata = keyboard.get_kb_data(); if(kbdata.If_OK) { int input = kbdata.set_text.toInt(); if(input>=min && input<=max) { //edit->setText(QString::number(input,'f',floatNum)); chartMonID = input; edit->setText(QString::number(chartMonID)+"/"+QString::number(max)); } } } bool Working_Page::setTimeInput(Custom_LineEdit *edit, int space) { edit->setStyleSheet("color:red"); KeyBoard_Num keyboard(this,INPUT_TIME,work_thread); if(space) keyboard.setGeometry(215,110,300,350); else keyboard.setGeometry(230,130,300,350); keyboard.execKeyboard(); edit->setStyleSheet("color:black"); DATA_KB_RTN kbdata = keyboard.get_kb_data(); if(kbdata.If_OK) { QString data = kbdata.set_text; if(checkTimeText(data)) { edit->setText(QString("%1:%2") .arg(data.section(":",0,0).trimmed(). toInt(),2,10,QChar('0')) .arg(data.section(":",1,1).trimmed(). toInt(),2,10,QChar('0'))); } } return kbdata.If_OK; } bool Working_Page::checkTimeText(QString time) { if(time.length()<3) return false; if(time.contains(QRegExp("[.-]"))) return false; QString hour = time.section(":",0,0).trimmed(); QString minute = time.section(":",1,1).trimmed(); int ih = hour.toInt(); int im = minute.toInt(); if(ih<0 || ih>99) return false; if(im<0 || im>59) return false; if((im == 0) && (ih == 0)) return false; return true; } //************格式化单体电压*****************// QString Working_Page::format_monID(int index) { //格式化输出#001格式的单体编号 return QString("%1%2").arg("#").arg(index,3,10,QChar('0')); } QString Working_Page::format_monomer(int index,int vol) { //格式化输出#001-00.000V格式的单体电压数据 QString show;QString svol; vol = ClassXML::getMonomerVol(work_thread->get_mon_source(),vol); svol = QString::number((float)vol/1000,'f',3); show = QString("%1%2-%3").arg("#").arg(index+1,3,10,QChar('0')).arg(svol,6,QChar('0')); return show; } //**************实时曲线上限******************// double Working_Page::get_top_chart(QVector data_v){ double top = data_v.at(0); for(int i=1;i top) top = data_v.at(i); } top *= 1.2; return (top); } //**************柱状图上限******************// double Working_Page::get_top_barmon(QVector data_v,QVector data_vold,int state){ double top = data_v.at(0); for(int i=1;i top) top = data_v.at(i); } if(state != WorkStopped){ for(int i=0;i top) top = data_vold.at(i); } } top *= 1.5; return top; } //************告警窗口*****************// void Working_Page::popBox(QString msg) { MessageBox box( this, QMessageBox::Warning,MB_Caption, msg, QMessageBox::Ok, QMessageBox::Ok, work_thread); box.exec(); } void Working_Page::popBoxAlarm(quint8 alarm) { if_update = false; work_thread->localData.popBox = 0x80; //----------------停止告警--------------- if(ui->comboBox_Type->currentIndex() == 0){//放电 if(alarm !=0 && alarm != 8 && alarm != 9&& alarm != WPPOWERBREAKSTOP) { if(test_param_xml.test_mode == ONline_working && alarm != WPCURRENTERROR && alarm != WPTEMPHIGHSTOP && alarm != ERRORSTOP && alarm != WPCONNECTERROR && work_thread->localData.SysWorkState != Paused_Dischg)//剔除单体下限到暂停 {//转充电 work_thread->localData.waitTimeCount = ChargeDelayTime = CHARGE_DELAY_TIME; //初始化时间//60 } else//不转充电 { if(!work_thread->iconState.wifiState) { ui->comboBox_Type->setEnabled(true); ui->edit_Setmode->setEnabled(true);ui->edit_Setmode->setStyleSheet("color:black"); #if PageType == FBO48CT ui->edit_workmode->setEnabled(true);ui->edit_workmode->setStyleSheet("color:black"); #endif #if PageType == FBO48CT || PageType == FBI48CT ui->edit_acstop->setEnabled(true);ui->edit_acstop->setStyleSheet("color:black"); #endif } } if(alarmiconState.wifiState) { if(test_param_xml.test_mode == ONline_working && work_thread->localData.SysWorkState == WaitForCharging) { isCloseBeep = true; if_alarm=true; } } else { if_alarm=true; isCloseBeep = false; CurrentBox->setText(AlarmText); if(QMessageBox::Ok == CurrentBox->exec())//转充电 { isCloseBeep = true; if(test_param_xml.test_mode == ONline_working && work_thread->localData.SysWorkState == WaitForCharging) { // setParamEnabled(false);//禁止编辑参数 // ui->pushButton_Start->setEnabled(false); } else if_alarm=false; } else//取消转充电 { isCloseBeep = true; ////// if_alarm=false; } } } } else { if(!work_thread->iconState.wifiState) { ui->comboBox_Type->setEnabled(true); } if(alarmiconState.wifiState) { isCloseBeep = true; if_alarm=true; } else { if_alarm=true; isCloseBeep = false; CurrentBox->setText(AlarmText); if(QMessageBox::Ok == CurrentBox->exec()) { isCloseBeep = true; if_alarm=false; } } } } void Working_Page::alarm_beep() { if(!isCloseBeep) BD->BuzzerBeep(500); if(test_param_xml.test_mode == ONline_working && work_thread->localData.SysWorkState == WaitForCharging) { quint16 olV = work_thread->localData.OnlineVol; if(/*work_thread->localData.OnlineVol*/olV < test_param_xml.onlinevol_lowlimit){ work_thread->localData.waitTimeCount = ChargeDelayTime = CHARGE_DELAY_TIME; } if(!isCloseBeep) { if(/*work_thread->localData.OnlineVol*/olV < test_param_xml.onlinevol_lowlimit) CurrentBox->setText(tr("在线电压异常，等待充电！")); else { if(work_thread->if_cn) CurrentBox->setText(AlarmText+"\n"+ QString::number(ChargeDelayTime,10) +"秒后启动充电！"); else CurrentBox->setText(AlarmText+"\n"+tr("秒后启动充电！")+QString::number(ChargeDelayTime,10)); } } else { if(/*work_thread->localData.OnlineVol*/olV < test_param_xml.onlinevol_lowlimit) ui->label_DropIndex->setText(tr("在线电压异常，等待充电！")); else { if(work_thread->if_cn) ui->label_DropIndex->setText(QString::number(ChargeDelayTime,10)+"秒后启动充电！"); else ui->label_DropIndex->setText(tr("秒后启动充电！")+QString::number(ChargeDelayTime,10)); } } if(ChargeDelayTime <= 0) { if(!isCloseBeep) CurrentBox->accept(); isCloseBeep = true;///// if_alarm=false; //启动充电控制 if(AutoStartChargeTest() == false) { //启动充电失败 setStateAlarmAndDrop(work_thread->localData.SysWorkState,0,0); qDebug()<<"启动充电失败"; } return; } ChargeDelayTime--; work_thread->localData.waitTimeCount = ChargeDelayTime; } } void Working_Page::DischargeWaitF1() { if(work_thread->localData.RLY_OK & TKQ_VALUE) { emit sendStart(work_thread->CMD_PowerSwithOff,0); popBox(tr("F1未闭合！")); return; } else { memcpy(SingleVolBeforeTest,work_thread->fboData.SingleVol,sizeof(SingleVolBeforeTest)); emit sendStart(work_thread->CMD_StartDischarge,batteryName); } } void Working_Page::ChargeWaitF1() { if(work_thread->localData.RLY_OK & TKQ_VALUE) { ui->comboBox_Type->setEnabled(true); emit sendStart(work_thread->CMD_PowerSwithOff,0); popBox(tr("F1未闭合！")); return; } else { memcpy(SingleVolBeforeTest,work_thread->fboData.SingleVol,sizeof(SingleVolBeforeTest)); emit sendStart(chargeCmd,batteryName); } } void Working_Page::TabcurrentChangeSlot(int index) { if(index == 3) { ReadDataSlot(); } } void Working_Page::toHide() { btn_update = 0; work_thread->localData.Interface = FACE_HOME; getDataTimer->stop(); this->hide(); } void Working_Page::toShow(int type) { if_update = true; btn_update = 0; if_readData = false; if_alarm = false; if_exec = false; IF_READCUR = 0; initConnectBeep(false); initPageShow(); ui->tabWidget->setCurrentIndex(0); initConnectBeep(true); setParamEnabled(true); vector_groupvol.clear(); vector_cur.clear(); vector_cap.clear(); vector_mon.clear(); vector_second.clear(); GetDataSlot(); getDataTimer->start(); if(type == FACE_CHAR) { ui->comboBox_Type->setCurrentIndex(1);//充电 } else { ui->comboBox_Type->setCurrentIndex(0);//放电 } if(test_param_xml.mon_number==0){ if(ui->comboBox_ChartType->count()==4) ui->comboBox_ChartType->removeItem(3); } else { if(ui->comboBox_ChartType->count()==3){ QPixmap pixmap(1, 50); pixmap.fill(Qt::transparent); QIcon icon(pixmap); ui->comboBox_ChartType->setIconSize(QSize(1, 50)); ui->comboBox_ChartType->addItem(icon,tr("单体电压")); } } work_thread->localData.Interface=type; ui->comboBox_ChartType->setCurrentIndex(0);//组端电压 ui->comboBox_GroupM->setCurrentIndex(0); ui->comboBox_Type->setEnabled(true); ui->label_Group->setText(tr("组：")+"-"); ui->label_MaxMon->setText(tr("最高：")+"-"); ui->label_MinMon->setText(tr("最低：")+"-"); ui->label_GroupChart->setText(tr("组：")+"-"); ui->label_MaxMonChart->setText(tr("最高：")+"-"); ui->label_MinMonChart->setText(tr("最低：")+"-"); this->show(); } void Working_Page::initPageShow() { ClassXML::ReadNewestPNameXml(batteryName); if(false == ClassXML::ReadTestParamXml(batteryName, test_param_xml)) { batteryName = Default_Battery; ClassXML::ModifyNewestPNameXml(batteryName); ClassXML::ReadTestParamXml(batteryName, test_param_xml); } if(PageType == FBI48CT){ test_param_xml.test_mode = ONline_working; if(!TYPE_FBI_10480 && !TYPE_FBI_4548 && !TYPE_FBI_20240) test_param_xml.onlinevol_lowlimit = onlinevollow; } else if(PageType == IDCE48CT) test_param_xml.test_mode = OFFline_working; nominalCap = test_param_xml.nominal_cap; work_thread->initWorkPageShow(); isCloseBeep = false; chartMonID = 1; allMonNum = test_param_xml.mon_number*test_param_xml.group_number; GmonNum = test_param_xml.mon_number; CBGroupIndex = 1; mon_table.pageIndex = 1; mon_table.monPageIndex = 1; mon_table.monGroupIndex = 1; //参数显示 initParam(); //实时曲线初始化 initTestChart(); // QVector temp(24); // bars4->setData(temp,temp); ui->edit_mon_id->setText("1/"+QString::number(GmonNum)); vector_mon.resize(allMonNum); ui->comboBox_GroupM->clear(); ui->comboBox_GroupM->setIconSize(QSize(1, 50)); QPixmap pixmap(1, 50); pixmap.fill(Qt::transparent); QIcon icon(pixmap); if(test_param_xml.group_number != 1) { for(int i=0;icomboBox_GroupM->findText(tr("组")+QString::number(i+1))==-1) ui->comboBox_GroupM->addItem(icon,tr("组")+QString::number(i+1)); } } QTimer::singleShot(100,this,SLOT(SendParamSlot())); } void Working_Page::initConnectBeep(bool en) { if(en) { set_btn_beep(ui->tabWidget,SIGNAL(currentChanged(int))); set_btn_beep(ui->comboBox_Type,SIGNAL(activated(int))); set_btn_beep(ui->comboBox_ChartType,SIGNAL(activated(int))); set_btn_beep(ui->comboBox_GroupM,SIGNAL(activated(int))); connect(ui->comboBox_GroupM,SIGNAL(currentIndexChanged(int)),this,SLOT(GroupMComboBoxChangeSlot(int))); } else { set_btn_nobeep(ui->tabWidget,SIGNAL(currentChanged(int))); set_btn_nobeep(ui->comboBox_Type,SIGNAL(activated(int))); set_btn_nobeep(ui->comboBox_ChartType,SIGNAL(activated(int))); set_btn_nobeep(ui->comboBox_GroupM,SIGNAL(activated(int))); disconnect(ui->comboBox_GroupM,SIGNAL(currentIndexChanged(int)),this,SLOT(GroupMComboBoxChangeSlot(int))); } } void Working_Page::operatorCMD_Work(int cmd) { if(work_thread->localData.Interface != FACE_DIS && work_thread->localData.Interface != FACE_CHAR) return; if(PARAM_PAGE_CMD_START_FAN == cmd) { if(AppStartAlarm()) return; if_useDroplabel = true; if(IGBT_VALUE) ui->label_DropIndex->setText(tr("请确认风扇正常运转且FO闭合")); else ui->label_DropIndex->setText(tr("请确认风扇正常运转")); emit sendStart(work_thread->CMD_StartFanWork,0); if(work_thread->localData.Interface == FACE_DIS){ if(work_thread->ctrlJDQ()!=0) return; } } else if(PARAM_PAGE_CMD_PARAM == cmd) { ClassXML::ReadNewestPNameXml(batteryName); if(false == ClassXML::ReadTestParamXml(batteryName, test_param_xml)) { batteryName = Default_Battery; ClassXML::ModifyNewestPNameXml(batteryName); ClassXML::ReadTestParamXml(batteryName, test_param_xml); } nominalCap = test_param_xml.nominal_cap; chartMonID = 1; allMonNum = test_param_xml.mon_number*test_param_xml.group_number; GmonNum = test_param_xml.mon_number; CBGroupIndex = 1; mon_table.pageIndex = 1; mon_table.monPageIndex = 1; mon_table.monGroupIndex = 1; //参数显示 initParam(); ui->edit_mon_id->setText("1/"+QString::number(GmonNum)); vector_mon.resize(allMonNum); //ui->comboBox_GroupM->clear(); ui->comboBox_GroupM->setIconSize(QSize(1, 50)); QPixmap pixmap(1, 50); pixmap.fill(Qt::transparent); QIcon icon(pixmap); if(test_param_xml.mon_number==0){ if(ui->comboBox_ChartType->count()==4) ui->comboBox_ChartType->removeItem(3); } else { if(ui->comboBox_ChartType->count()==3){ ui->comboBox_ChartType->setIconSize(QSize(1, 50)); ui->comboBox_ChartType->addItem(icon,tr("单体电压")); } } if(test_param_xml.group_number != 1) { if(!ui->comboBox_GroupM->isVisible()&&ui->comboBox_ChartType->currentIndex()==3 ) ui->comboBox_GroupM->setVisible(true); if(ui->comboBox_GroupM->count()comboBox_GroupM->count();icomboBox_GroupM->addItem(icon,tr("组")+QString::number(i+1)); } } else { for(int i=ui->comboBox_GroupM->count();i>=test_param_xml.group_number;i--) { ui->comboBox_GroupM->removeItem(i); } } } else { if(ui->comboBox_GroupM->isVisible()) ui->comboBox_GroupM->setVisible(false); } QTimer::singleShot(100,this,SLOT(SendParamSlot())); } else if(PARAM_PAGE_CMD_START_PSW == cmd )//闭合F1 { if(AppStartAlarm()) return; if_useDroplabel=true; if((work_thread->localData.RLY_OK & IGBT_VALUE)&& (work_thread->fboData.SumVoltage>F0VOL))//ROK1为1 FO未闭合 { ui->label_DropIndex->setText(tr("F0未闭合！")); emit sendStart(work_thread->CMD_PowerSwithOff,0); return; } // if(TKQ_VALUE) // ui->label_DropIndex->setText(tr("请确认风扇正常运转且FO闭合")); // else // ui->label_DropIndex->setText(tr("请确认风扇正常运转")); ui->label_DropIndex->setText(tr("请合上F1！")); emit sendStart(work_thread->CMD_PowerSwithOn,0); } else if(cmd == PARAM_PAGE_CMD_START_DIS || cmd == PARAM_PAGE_CMD_START_CHR ) { toStart(Type_WIFI); } else if(cmd == PARAM_PAGE_CMD_PAUSE) { switch(work_thread->localData.SysWorkState) { case Discharging: emit sendStart(work_thread->CMD_PauseDischarge,batteryName+"/"); break; case Charging: emit sendStart(work_thread->CMD_PauseCharge,batteryName+"/"); break; } } else if(cmd == PARAM_PAGE_CMD_STOP) { toStop(Type_WIFI); } } void Working_Page::toStart(int Type) { if_update = true; if_useDroplabel=false; QString msg=""; if(work_thread->Check_Mashine_Type){ msg = tr("设备类型设置错误，请重新配置！"); popBox(msg); return; } if(work_thread->localData.SoftVersion == 0){ msg = tr("线缆连接异常或者内部通信异常！"); popBox(msg); return; } if((!work_thread->IF_J9Close)&&JT_VALUE) { if(Type == Type_WIFI) { msg = tr("设备处于紧急停止状态！"); if_useDroplabel=true; ui->label_DropIndex->setText(msg); } else { msg = tr("设备处于紧急停止状态，请检查并断电重启！"); popBox(msg); } return; } if(work_thread->localData.GroupVol>VolTooHigh || work_thread->localData.OnlineVol>VolTooHigh) { msg = tr("电压过高！"); } if(msg!="") { if(Type == Type_Btn) { popBox(msg); return; } else { emit sendStart(work_thread->CMD_PowerSwithOff,0); if_useDroplabel=true; ui->label_DropIndex->setText(msg); return; } } if(Type == Type_Btn) { chargeCmd = work_thread->CMD_ChargeNull; if(ui->comboBox_Type->currentIndex() == 0) { int vol_dif = qAbs(work_thread->localData.GroupVol - work_thread->localData.OnlineVol); if(work_thread->localData.GroupVol=work_thread->fboData.SumVoltage) { popBox(tr("组端下限参数异常")); return; } else if(test_param_xml.lower_number<=work_thread->localData.monomerLowCount && test_param_xml.mon_number!=0) { popBox(tr("单体下限参数异常")); return; } else if(test_param_xml.preset_time<=0) { popBox(tr("预放时间参数异常")); return; } else if(test_param_xml.preset_cap<=0) { popBox(tr("预放容量参数异常")); return; } //在线阀值大于在线电压-2V视为报警 else if((test_param_xml.onlinevol_lowlimit>work_thread->fboData.OnlineVol-20)&& (TYPE_FBI_10480||TYPE_FBI_20240)) { popBox(tr("在线阈值参数异常")); return; } else if( vol_dif > 50 && TYPE_IDCE_940) { popBox(tr("内部电压检测异常")); return; } else if(test_param_xml.onlinevol_lowlimit>=work_thread->fboData.OnlineVol && test_param_xml.test_mode == ONline_working && (PageType == FBO48CT || TYPE_FBI_10480 || TYPE_FBI_4548 || TYPE_FBI_20240)) { popBox(tr("在线电压低")); return; } else if(test_param_xml.booster_ceiling<=work_thread->localData.OnlineVol && PageType == FBI48CT) { popBox(tr("升压上限参数异常")); return; } else if(test_param_xml.preset_powerlocalData.RLY_OK & IGBT_VALUE))//ROK1为1 FO未闭合 { if(work_thread->fboData.SumVoltage>F0VOL) { MessageBox box( this, QMessageBox::Question,MB_Caption, tr("请合上F0!"), QMessageBox::Yes|QMessageBox::No, QMessageBox::Yes, work_thread ); if(box.exec()!=QMessageBox::Yes) return; else { if((work_thread->localData.RLY_OK & IGBT_VALUE)&& (work_thread->fboData.SumVoltage>F0VOL)) { popBox(tr("F0未闭合！")); return; } } } else { MessageBox box( this, QMessageBox::Question,MB_Caption, tr("请确认F0已闭合!"), QMessageBox::Yes|QMessageBox::No, QMessageBox::Yes, work_thread ); if(box.exec()!=QMessageBox::Yes) return; } } emit sendStart(work_thread->CMD_StartFanWork,0);//开风扇有置位所有继电器 if(work_thread->ctrlJDQ()!=0) return; MessageBox box( this, QMessageBox::Question,MB_Caption, tr("请确认风扇是否正常运转?"), QMessageBox::Yes|QMessageBox::No, QMessageBox::Yes, work_thread ); if(box.exec()!=QMessageBox::Yes){ emit sendStart(work_thread->CMD_StopFanWork,0); return; } } else if(ui->comboBox_Type->currentIndex() == 1 && test_param_xml.test_mode == ONline_working) { chargeCmd = work_thread->CMD_StartCharge; if(work_thread->localData.GroupVollocalData.GroupVollocalData.OnlineVolCMD_ChargeNull; } else { popBox(tr("电压过低！")); return; } } else if(test_param_xml.group_lower>=work_thread->fboData.SumVoltage) { //组端和在线都低于10V，则充电监测 if(work_thread->localData.GroupVollocalData.OnlineVolCMD_ChargeNull; } else { popBox(tr("组端下限参数异常")); return; } } if(chargeCmd == work_thread->CMD_StartCharge){//充电监测不判断F0 if(work_thread->localData.RLY_OK & IGBT_VALUE) { if(work_thread->fboData.SumVoltage>F0VOL) { MessageBox box( this, QMessageBox::Question, tr("系统信息"), tr("请合上F0!"), QMessageBox::Yes|QMessageBox::No, QMessageBox::Yes, work_thread ); if(box.exec()!=QMessageBox::Yes) return; else { if((work_thread->localData.RLY_OK & IGBT_VALUE)&& (work_thread->fboData.SumVoltage>F0VOL)) { popBox(tr("F0未闭合！")); return; } } } else { MessageBox box( this, QMessageBox::Question,MB_Caption, tr("请确认F0已闭合!"), QMessageBox::Yes|QMessageBox::No, QMessageBox::Yes, work_thread ); if(box.exec()!=QMessageBox::Yes) return; } } //充电监测不开风扇！！！ emit sendStart(work_thread->CMD_StartFanWork,0); if(!work_thread->CheckFain()){ MessageBox box( this, QMessageBox::Question,MB_Caption, tr("请确认风扇是否正常运转?"), QMessageBox::Yes|QMessageBox::No, QMessageBox::Yes, work_thread ); if(box.exec()!=QMessageBox::Yes){ emit sendStart(work_thread->CMD_StopFanWork,0); return; } } } } emit sendParam(test_param_xml); IF_READCUR = 1; switch(work_thread->localData.SysWorkState) { case WorkStopped: { //保存放电前的单体电压 switch(ui->comboBox_Type->currentIndex()) { case 0: { if(TKQ_VALUE) { emit sendStart(work_thread->CMD_PowerSwithOn,0); MessageBox box( this, QMessageBox::Question,MB_Caption, tr("请合上F1！"), QMessageBox::Yes|QMessageBox::No, QMessageBox::Yes, work_thread ); if(box.exec()!=QMessageBox::Yes){ emit sendStart(work_thread->CMD_PowerSwithOff,0); return; } btn_update = 10; ui->pushButton_Exit->setEnabled(false); ui->pushButton_Start->setEnabled(false); ui->pushButton_Stop->setEnabled(false); ui->edit_Setmode->setEnabled(false);ui->edit_Setmode->setStyleSheet("color:gray"); #if PageType == FBO48CT ui->edit_workmode->setEnabled(false);ui->edit_workmode->setStyleSheet("color:gray"); #endif #if PageType == FBO48CT || PageType == FBI48CT ui->edit_acstop->setEnabled(false);ui->edit_acstop->setStyleSheet("color:gray"); #endif QTimer::singleShot(1000,this,SLOT(DischargeWaitF1())); } else { btn_update = 10; ui->pushButton_Exit->setEnabled(false); ui->pushButton_Start->setEnabled(false); ui->pushButton_Stop->setEnabled(false); memcpy(SingleVolBeforeTest,work_thread->fboData.SingleVol,sizeof(SingleVolBeforeTest)); emit sendStart(work_thread->CMD_StartDischarge,batteryName); } } break; case 1: { if(chargeCmd == work_thread->CMD_StartCharge) { if(TKQ_VALUE) { emit sendStart(work_thread->CMD_PowerSwithOn,0); MessageBox box( this, QMessageBox::Question,MB_Caption, tr("请合上F1！"), QMessageBox::Yes|QMessageBox::No, QMessageBox::Yes, work_thread ); if(box.exec()!=QMessageBox::Yes){ emit sendStart(work_thread->CMD_PowerSwithOff,0); return; } } QTimer::singleShot(1000,this,SLOT(ChargeWaitF1())); } else { memcpy(SingleVolBeforeTest,work_thread->fboData.SingleVol,sizeof(SingleVolBeforeTest)); emit sendStart(chargeCmd,batteryName+"/");//充电监测 } } break; } if_readData=true;readDataTimer=1; ui->edit_Setmode->setEnabled(false);ui->edit_Setmode->setStyleSheet("color:gray"); #if PageType == FBO48CT ui->edit_workmode->setEnabled(false);ui->edit_workmode->setStyleSheet("color:gray"); #endif #if PageType == FBO48CT || PageType == FBI48CT ui->edit_acstop->setEnabled(false);ui->edit_acstop->setStyleSheet("color:gray"); #endif ui->comboBox_Type->setEnabled(false); break; } case Paused_Dischg: case Paused_charge: case Charging://限流转直充 { if(work_thread->GetSysState().TestType == TestTypeDischarge) { ui->pushButton_Start->setEnabled(false); ui->pushButton_Stop->setEnabled(false); btn_update = 10; emit sendStart(work_thread->CMD_StartDischarge,batteryName+"/"); } else { if(test_param_xml.test_mode == ONline_working) emit sendStart(chargeCmd,batteryName+"/"); else emit sendStart(chargeCmd,batteryName+"/");//充电监测 } break; } } } else { chargeCmd = work_thread->CMD_StartCharge; if(ui->comboBox_Type->currentIndex()==0){ //放电 if(work_thread->localData.GroupVolCMD_PowerSwithOff,0); if_useDroplabel=true; ui->label_DropIndex->setText(tr("电压过低！")); return; } else if(test_param_xml.group_lower>=work_thread->fboData.SumVoltage) { if(CONTROL_TKQ) emit sendStart(work_thread->CMD_PowerSwithOff,0); if_useDroplabel=true; ui->label_DropIndex->setText(tr("组端下限参数异常")); return; } else if(test_param_xml.lower_number<=work_thread->localData.monomerLowCount && test_param_xml.mon_number!=0) { if(CONTROL_TKQ) emit sendStart(work_thread->CMD_PowerSwithOff,0); if_useDroplabel=true; ui->label_DropIndex->setText(tr("单体下限参数异常")); return; } else if(test_param_xml.preset_time<=0) { if(CONTROL_TKQ) emit sendStart(work_thread->CMD_PowerSwithOff,0); if_useDroplabel=true; ui->label_DropIndex->setText(tr("预放时间参数异常")); return; } else if(test_param_xml.preset_cap<=0) { if(CONTROL_TKQ) emit sendStart(work_thread->CMD_PowerSwithOff,0); if_useDroplabel=true; ui->label_DropIndex->setText(tr("预放容量参数异常")); return; } else if((test_param_xml.onlinevol_lowlimitfboData.SumVoltage+2)&& (TYPE_FBI_10480||TYPE_FBI_20240)) { if(CONTROL_TKQ) emit sendStart(work_thread->CMD_PowerSwithOff,0); if_useDroplabel=true; ui->label_DropIndex->setText(tr("在线阈值参数异常")); return; } else if(test_param_xml.preset_powerCMD_PowerSwithOff,0); if_useDroplabel=true; ui->label_DropIndex->setText(tr("功率设置过低")); return; } } else { //充电/充电监测 if(work_thread->localData.GroupVollocalData.GroupVollocalData.OnlineVolCMD_ChargeNull; } else { if_useDroplabel=true; ui->label_DropIndex->setText(tr("电压过低！")); return; } } else if(test_param_xml.group_lower>=work_thread->fboData.SumVoltage) { //组端和在线都低于10V，则充电监测 if(work_thread->localData.GroupVollocalData.OnlineVolCMD_ChargeNull; } else { if_useDroplabel=true; ui->label_DropIndex->setText(tr("组端下限参数异常")); return; } } } if(chargeCmd != work_thread->CMD_ChargeNull){ if((work_thread->localData.RLY_OK & IGBT_VALUE)&& (work_thread->fboData.SumVoltage>F0VOL)) { if(CONTROL_TKQ) emit sendStart(work_thread->CMD_PowerSwithOff,0); if_useDroplabel=true; ui->label_DropIndex->setText(tr("F0未闭合！")); return; } if(work_thread->localData.RLY_OK & TKQ_VALUE) { if(CONTROL_TKQ) emit sendStart(work_thread->CMD_PowerSwithOff,0); if_useDroplabel=true; ui->label_DropIndex->setText(tr("F1未闭合！")); return; } } emit sendParam(test_param_xml); IF_READCUR = 1; switch(work_thread->localData.SysWorkState) { case WorkStopped: { //保存放电前的单体电压 memcpy(SingleVolBeforeTest,work_thread->fboData.SingleVol,sizeof(SingleVolBeforeTest)); if_useDroplabel=false; if(ui->comboBox_Type->currentIndex()==0) { emit sendStart(work_thread->CMD_StartDischarge,batteryName+"/"); } else { emit sendStart(chargeCmd,batteryName+"/"); } if_readData=true;readDataTimer=1; break; } case Paused_Dischg: case Paused_charge: { if(work_thread->GetSysState().TestType == TestTypeDischarge) emit sendStart(work_thread->CMD_StartDischarge,batteryName+"/"); else { emit sendStart(chargeCmd,batteryName+"/"); } break; } ui->edit_Setmode->setEnabled(false); ui->edit_Setmode->setStyleSheet("color:gray"); } } } //直充充电 没有判断F0和F1 void Working_Page::toStartZCH(int Type) { if_useDroplabel=false; QString msg=""; if((!work_thread->IF_J9Close)&&JT_VALUE) { if(Type == Type_WIFI) { msg = tr("设备处于紧急停止状态！"); if_useDroplabel=true; ui->label_DropIndex->setText(msg); } else { msg = tr("设备处于紧急停止状态，请检查并断电重启！"); popBox(msg); } return; } if(work_thread->localData.GroupVol>VolTooHigh|| work_thread->localData.OnlineVol>VolTooHigh) { msg = tr("电压过高！"); } else if(test_param_xml.onlinevol_lowlimit>=work_thread->fboData.OnlineVol && test_param_xml.test_mode == ONline_working && (PageType == FBO48CT || TYPE_FBI_10480 || TYPE_FBI_4548 || TYPE_FBI_20240)) { msg = tr("在线电压低"); } if(msg!="") { if(Type == Type_Btn) { popBox(msg); return; } else { if_useDroplabel=true; ui->label_DropIndex->setText(msg); return; } } if(test_param_xml.test_mode == ONline_working) { chargeCmd = work_thread->CMD_StartZCharge; if(work_thread->localData.GroupVollocalData.GroupVollocalData.OnlineVolCMD_ChargeNull; } else { popBox(tr("电压过低！")); return; } } else if(test_param_xml.group_lower>=work_thread->fboData.SumVoltage) { //组端和在线都低于10V，则充电监测 if(work_thread->localData.GroupVollocalData.OnlineVolCMD_ChargeNull; } else { popBox(tr("组端下限参数异常")); return; } } if(qAbs(work_thread->localData.OnlineVol-work_thread->localData.GroupVol)>15*test_param_xml.mon_vol/20){ MessageBox box( this, QMessageBox::Question, tr("系统信息"), tr("压差过大,是否继续启动?"), QMessageBox::Yes|QMessageBox::No, QMessageBox::Yes, work_thread ); if(box.exec()!=QMessageBox::Yes) return; } if(!work_thread->CheckFain()){ emit sendStart(work_thread->CMD_StartFanWork,0); MessageBox box( this, QMessageBox::Question, tr("系统信息"), tr("请确认风扇是否正常运转?"), QMessageBox::Yes|QMessageBox::No, QMessageBox::Yes, work_thread ); if(box.exec()!=QMessageBox::Yes){ emit sendStart(work_thread->CMD_StopFanWork,0); return; } } } emit sendParam(test_param_xml); if_readData=true;readDataTimer=1; switch(work_thread->localData.SysWorkState) { case WorkStopped: { //保存放电前的单体电压 memcpy(SingleVolBeforeTest,work_thread->fboData.SingleVol,sizeof(SingleVolBeforeTest)); emit sendStart(chargeCmd,batteryName+"/");//充电监测 ui->comboBox_Type->setEnabled(false); ui->edit_Setmode->setEnabled(false);ui->edit_Setmode->setStyleSheet("color:gray"); #if PageType == FBO48CT ui->edit_workmode->setEnabled(false);ui->edit_workmode->setStyleSheet("color:gray"); #endif #if PageType == FBO48CT || PageType == FBI48CT ui->edit_acstop->setEnabled(false);ui->edit_acstop->setStyleSheet("color:gray"); #endif break; } case Paused_charge: case Charging: { if(test_param_xml.test_mode == ONline_working) emit sendStart(work_thread->CMD_StartZCharge,batteryName+"/"); else emit sendStart(work_thread->CMD_ChargeNull,batteryName+"/");//充电监测 break; } } } void Working_Page::toStop(int Type) { if(Type == Type_Btn) { ui->pushButton_Start->setEnabled(false); ui->pushButton_Stop->setEnabled(false); btn_update = 10; switch(work_thread->localData.SysWorkState) { case Discharging: emit sendStart(work_thread->CMD_PauseDischarge,batteryName+"/"); break; case Paused_Dischg: case Paused_charge: { ui->comboBox_Type->setEnabled(true); if_readData=false; if(work_thread->GetSysState().TestType == TestTypeDischarge) { ui->edit_Setmode->setEnabled(true);ui->edit_Setmode->setStyleSheet("color:black"); #if PageType == FBO48CT ui->edit_workmode->setEnabled(true);ui->edit_workmode->setStyleSheet("color:black"); #endif #if PageType == FBO48CT || PageType == FBI48CT ui->edit_acstop->setEnabled(true);ui->edit_acstop->setStyleSheet("color:black"); #endif emit sendStart(work_thread->CMD_StopDischarge,batteryName+"/"); } else emit sendStart(work_thread->CMD_StopCharge,batteryName+"/"); break; } case Charging: emit sendStart(work_thread->CMD_PauseCharge,batteryName+"/"); break; } } else { if_readData=false; if(work_thread->GetSysState().TestType == TestTypeDischarge) emit sendStart(work_thread->CMD_StopDischarge,batteryName+"/"); else emit sendStart(work_thread->CMD_StopCharge,batteryName+"/"); } } bool Working_Page::AppStartAlarm() { bool res = false; if_useDroplabel=false; QString msg=""; if(work_thread->localData.GroupVollocalData.GroupVol>VolTooHigh ) { msg = tr("电压过高！"); } if(msg!="") { if_useDroplabel=true; ui->label_DropIndex->setText(msg); res = true; } return res; } void Working_Page::ContinueTest(CHECK_DATA check_data_c, FBO_DATA fbodata_c){ //放电 充电 充电监测 放电暂停 充电暂停 等待充电 // qDebug()<<"ContinueTest:check_data_c.workstate"<localData.Interface != FACE_DIS && work_thread->localData.Interface != FACE_CHAR){ check_data_c.workstate = WorkStopped; Check_Obj::MTest_Data(check_data_c,false); work_thread->WriteEndFile(check_data_c.testfilename,fbodata_c); return; } if(work_thread->localData.GroupVol>VolTooHigh || work_thread->localData.OnlineVol>VolTooHigh){ check_data_c.workstate = WorkStopped; Check_Obj::MTest_Data(check_data_c,false); work_thread->WriteEndFile(check_data_c.testfilename,fbodata_c); popBox(tr("电压过高！")); return; } if(work_thread->localData.GroupVolWriteEndFile(check_data_c.testfilename,fbodata_c); popBox(tr("电压过低")); return; } if((work_thread->localData.RLY_OK & IGBT_VALUE)&& (work_thread->fboData.SumVoltage>F0VOL))//ROK1为1 FO未闭合 { MessageBox box( this, QMessageBox::Question,MB_Caption, tr("请合上F0!"), QMessageBox::Yes|QMessageBox::No, QMessageBox::Yes, work_thread ); if(box.exec()!=QMessageBox::Yes){ emit sendStart(work_thread->CMD_PowerSwithOff,0); check_data_c.workstate = WorkStopped; Check_Obj::MTest_Data(check_data_c,false); work_thread->WriteEndFile(check_data_c.testfilename,fbodata_c); return; } else { if((work_thread->localData.RLY_OK & IGBT_VALUE)&& (work_thread->fboData.SumVoltage>F0VOL)) { emit sendStart(work_thread->CMD_PowerSwithOff,0); check_data_c.workstate = WorkStopped; Check_Obj::MTest_Data(check_data_c,false); work_thread->WriteEndFile(check_data_c.testfilename,fbodata_c); popBox(tr("F0未闭合！")); return; } } } //F1判断，先闭合脱扣器 再判断是否闭合进入提示 emit sendStart(work_thread->CMD_PowerSwithOn,0); // qDebug()<<"ContinueTest:RLY_OK:"<localData.RLY_OK; if(work_thread->localData.RLY_OK & TKQ_VALUE) { // qDebug()<<"ContinueTest:F1-in-RLY_OK:"<localData.RLY_OK; MessageBox box( this, QMessageBox::Question,MB_Caption, tr("请合上F1！"), QMessageBox::Yes|QMessageBox::No, QMessageBox::Yes, work_thread ); if(box.exec()!=QMessageBox::Yes){ emit sendStart(work_thread->CMD_PowerSwithOff,0); check_data_c.workstate = WorkStopped; Check_Obj::MTest_Data(check_data_c,false); work_thread->WriteEndFile(check_data_c.testfilename,fbodata_c); return; } } } QTimer::singleShot(500,this,SLOT(delay_ContinueTest_Start())); } void Working_Page::delay_ContinueTest_Start(){ CHECK_DATA check_data_c; FBO_DATA fbodata_c; bool res = false; res = Check_Obj::RTest_Data(check_data_c); if(res){ res = false; res = Check_Obj::Read_Fbo_Data(check_data_c.testfilename,fbodata_c); } if(res == false){ check_data_c.workstate = WorkStopped; Check_Obj::MTest_Data(check_data_c,false); work_thread->setPowerCtrl(POWER_CTRL_INIT); work_thread->set_ifinit(true); return; } if((work_thread->localData.RLY_OK & TKQ_VALUE) && (check_data_c.workstate == Discharging || (check_data_c.workstate == Charging && check_data_c.alarmstate != CPNullCharging))) { check_data_c.workstate = WorkStopped; Check_Obj::MTest_Data(check_data_c,false); work_thread->WriteEndFile(check_data_c.testfilename,fbodata_c); emit sendStart(work_thread->CMD_PowerSwithOff,0); popBox(tr("F1未闭合！")); return; } else { if_readData=true;readDataTimer=1;IF_READCUR=1; ui->edit_Setmode->setEnabled(false);ui->edit_Setmode->setStyleSheet("color:gray"); #if PageType == FBO48CT ui->edit_workmode->setEnabled(false);ui->edit_workmode->setStyleSheet("color:gray"); #endif #if PageType == FBO48CT || PageType == FBI48CT ui->edit_acstop->setEnabled(false);ui->edit_acstop->setStyleSheet("color:gray"); #endif ui->comboBox_Type->setEnabled(false); memcpy(SingleVolBeforeTest,fbodata_c.SingleVol,sizeof(SingleVolBeforeTest)); emit sendParam(test_param_xml);//设置参数 if(check_data_c.workstate != WorkStopped){ work_thread->continuetest(check_data_c,fbodata_c); if(check_data_c.workstate == WaitForCharging){ // qDebug()<<"delay_ContinueTest_Start等待充电"; work_thread->localData.waitTimeCount = ChargeDelayTime = CHARGE_DELAY_TIME; isCloseBeep = true; if_alarm=true; } } } }