#ifndef DATA_DEFINE_H
#define DATA_DEFINE_H

#include "app_define.h"

#define MB_Caption          "Message"
#define File_Dir            "Data_files"
#define Default_Battery     "Default_Battery"
#define MaxDataNum          2000

#define  DISCHARGE_CURRENT  0
#define  DISCHARGE_POWER    1

#define OFFline_working     0
#define ONline_working      1

#define ACOFF_STOP          0//停止
#define ACOFF_CONTINUE      1//继续

#if __arm__
#define SOFT_ARM
#endif

#if (QT_VERSION <= QT_VERSION_CHECK(5,0,0))
#define SOFT_ARM_QT4
#endif

#define	  RS485CommPort     "/dev/ttymxc1"
#define	  PCCommPort        "/dev/ttymxc2"

#define   WiredMonCommPort  "/dev/ttymxc5"
#if mon_use_type == 0
#define	  Module905Com	 ""
#define	  LORACOM        ""
#elif mon_use_type == 1
#define	  Module905Com	 "/dev/ttymxc4"
#define	  LORACOM        ""
#elif mon_use_type == 2
#ifdef SOFT_ARM
#define	  LORACOM	 "/dev/ttymxc4"
#define	  Module905Com	 ""
#else
#define	  LORACOM	 "/dev/ttyUSB0"
#define   Module905Com ""
#endif
#endif

#ifdef SOFT_ARM
//const QString dataDir = "/media/mmcblk0p1/";
const QString dataDir = "/var/ftp/pub/USER_DATA/";
#else
const QString dataDir = "../Data/";

#endif

const QString setmonFile = dataDir+"setmon.xml"; //单体模块配置文件

const QString logoFile = dataDir+"logo.xml"; //开机界面
const QString usbDir = "/mnt/usb/";
const QString adjFile = dataDir+"adj_param.xml"; //校准参数
const QString sysFile = dataDir+"sys_param.xml"; //系统参数
const QString appVersion = "5.6.";       //主板版本号
const QString coreFile = "/app/fsVersion.txt";//核心板版本号文件
const QString configFile = "log_configfile.txt";//日志文件

#if TYPE_IDCE_6003
const QString dateVersion = ".6003";
const QString paramFile = "/param6003.xml";
const QString phoneVersion = "IDCE-Discharger,IDCE-6003NT,V1.0.0";
#elif TYPE_IDCE_6006
const QString dateVersion = ".6006";
const QString paramFile = "/param6006.xml";
const QString phoneVersion = "IDCE-Discharger,IDCE-6006NT,V1.0.0";
#elif TYPE_IDCE_60010
const QString dateVersion = ".60010";
const QString paramFile = "/param60010.xml";
const QString phoneVersion = "IDCE-Discharger,IDCE-60010NT,V1.0.0";
#elif TYPE_FBO_60010
const QString dateVersion = ".60010";
const QString paramFile = "/param60010.xml";
const QString phoneVersion = "FBO-Discharger,FBO-60010NT,V1.0.0";
#elif TYPE_FBO_6003
const QString dateVersion = ".6003";
const QString paramFile = "/param6003.xml";
const QString phoneVersion = "FBO-Discharger,FBO-6003NT,V1.0.0";
#elif TYPE_FBO_6006
const QString dateVersion = ".6006";
const QString paramFile = "/param6006.xml";
const QString phoneVersion = "FBO-Discharger,FBO-6006NT,V1.0.0";
#elif TYPE_IDCE_2415
const QString dateVersion = ".2415";
const QString paramFile = "/param2415.xml";
const QString phoneVersion = "IDCE-Discharger,IDCE-2415NT,V1.0.0";
#elif TYPE_IDCE_1110
const QString dateVersion = ".1110";
const QString paramFile = "/param1110.xml";
const QString phoneVersion = "IDCE-Discharger,IDCE-1110NT,V1.0.0";
#elif TYPE_IDCE_1230
const QString dateVersion = ".1230";
const QString paramFile = "/param1230.xml";
const QString phoneVersion = "IDCE-Discharger,IDCE-1230NT,V1.0.0";
#elif TYPE_IDCE_2206
const QString dateVersion = ".2206";
const QString paramFile = "/param2206.xml";
const QString phoneVersion = "IDCE-Discharger,IDCE-2206NT,V1.0.0";
#elif TYPE_FBO_2206
const QString dateVersion = ".2206";
const QString paramFile = "/param2206.xml";
const QString phoneVersion = "FBO-Discharger,FBO-2206NT,V1.0.0";
#elif TYPE_IDCE_2230
const QString dateVersion = ".2230";
const QString paramFile = "/param2230.xml";
const QString phoneVersion = "IDCE-Discharger,IDCE-2230NT,V1.0.0";
#elif TYPE_IDCE_2220
const QString dateVersion = ".2220";
const QString paramFile = "/param2220.xml";
const QString phoneVersion = "IDCE-Discharger,IDCE-2220NT,V1.0.0";
#elif TYPE_IDCE_4815MINI
const QString dateVersion = ".4815mini";
const QString paramFile = "/param4815mini.xml";
const QString phoneVersion = "IDCE-Discharger,IDCE-4815NT,V1.0.0";
#elif TYPE_IDCE_4815
const QString dateVersion = ".4815";
const QString paramFile = "/param4815.xml";
const QString phoneVersion = "IDCE-Discharger,IDCE-4815NT,V1.0.0";
#elif TYPE_IDCE_4830
const QString dateVersion = ".4830";
const QString paramFile = "/param4830.xml";
const QString phoneVersion = "IDCE-Discharger,IDCE-4830NT,V1.0.0";
#elif TYPE_IDCE_4850
const QString dateVersion = ".4850";
const QString paramFile = "/param4850.xml";
const QString phoneVersion = "IDCE-Discharger,IDCE-4850NT,V1.0.0";
#elif TYPE_FBO_4830
const QString dateVersion = ".4830";
const QString paramFile = "/param4830.xml";
const QString phoneVersion = "FBO-Discharger,FBO-4830NT,V1.0.0";
#elif TYPE_FBO_4850
const QString dateVersion = ".4850";
const QString paramFile = "/param4850.xml";
const QString phoneVersion = "FBO-Discharger,FBO-4850NT,V1.0.0";
#elif TYPE_FBO_2210 || TYPE_IDCE_2210
const QString dateVersion = ".2210";
const QString paramFile = "/param2210.xml";
const QString phoneVersion = "IDCE-Discharger,IDCE-2210NT,V1.0.0";
#elif TYPE_FBO_2415
const QString dateVersion = ".2415";
const QString paramFile = "/param2415.xml";
const QString phoneVersion = "FBO-Discharger,FBO-2415NT,V1.0.0";
#elif TYPE_FBO_4815
const QString dateVersion = ".4815";
const QString paramFile = "/param4815.xml";
const QString phoneVersion = "FBO-Discharger,FBO-4815NT,V1.0.0";
#elif TYPE_FBI_4548
const QString dateVersion = ".4548";
const QString paramFile = "/param4548.xml";
const QString phoneVersion = "FBI-Discharger,FBI-4548NT,V1.0.0";
#elif TYPE_FBI_10480
const QString dateVersion = ".10480";
const QString paramFile = "/param10480.xml";
const QString phoneVersion = "FBI-Discharger,FBI-10480NT,V1.0.0";
#elif TYPE_FBI_20240
const QString dateVersion = ".20240";
const QString paramFile = "/param20240.xml";
const QString phoneVersion = "FBI-Discharger,FBI-20240NT,V1.0.0";
#elif TYPE_IDCE_940
const QString dateVersion = ".940";
const QString paramFile = "/param940.xml";
const QString phoneVersion = "IDCE-Discharger,IDCE-940NT,V1.0.0";
#elif TYPE_IDCE_840
const QString dateVersion = ".840";
const QString paramFile = "/param840.xml";
const QString phoneVersion = "IDCE-Discharger,IDCE-840NT,V1.0.0";
#endif

const QString dataType = "*.FBO";
const QString newestPNameFile = dataDir+"newest_pname.xml";
const QString F1223P_File = usbDir+"F1223P_APP.bin";
const QString update_cfg = usbDir+"update.cfg";

typedef struct _welcome_logo_
{
    bool     LOGOEN;            //图标显示
    QString  ModelLogo;         //型号
    QString  MachineName;       //机器名称
    QString  CompanyCName;       //公司名称
    QString  CompanyEName;       //公司英文名

}WELCOME_LOGO;

//-----------------sum data------------------------------
typedef struct _ct_date_time_
{
    quint8 year;
    quint8 month;
    quint8 day;
    quint8 hour;
    quint8 minute;
    quint8 second;
}CT_DATE_TIME;

typedef struct _test_time_
{
    quint8 hour;
    quint8 minute;
    quint8 second;
}TEST_TIME;

typedef struct _fbo_data_head_start_
{
    CT_DATE_TIME TestStartTime;         //放电开始的时间
    quint8 Device;                      //仪表类型
    quint8 DataVersion;                 //数据版本
    quint8 DataType;                    //数据类型;0xFD表示放电,0xFC表示充电
    quint8 HourRate;                    //小时率
    quint8 SaveInterval;                //采集间隔
    quint8 MonomerVol;                  //单体电压类型
    quint16 STDCap;                     //标称容量
    quint16 TestCur;                    //测试电流
    quint16 MVLLimit;                   //单体下限
    quint16 SumVLLimit;                 //组端下限
    quint16 BattSum;                    //单体数量
    quint16 BattGroup;                  //电池组数
    quint16 MVLLimitCount;              //单体下限个数
}FBO_DATA_HEAD_START;

typedef struct _fbo_data_head_stop_
{
    TEST_TIME TestTimeLong;         //测试时长
    quint8 StopType;                //结束方式
    quint8 BlockSum;                //保存数据的总块数
    quint8 StandBy;                 //保留备用
    quint16 SMaxIndex[4];           //最高单体索引
    quint16 SMinIndex[4];           //最低单体索引
    quint16 SMaxVol[4];             //最高单体
    quint16 SMinVol[4];             //最低单体
    quint16 TestCap;                //测试容量
}FBO_DATA_HEAD_STOP;

typedef struct _test_data_info_
{
    FBO_DATA_HEAD_START fbo_data_head_start;
    FBO_DATA_HEAD_STOP fbo_data_head_stop;
}TEST_DATA_INFO;

#define FBO_DATA_HEAD_START_LENTH  sizeof(FBO_DATA_HEAD_START)
#define FBO_DATA_HEAD_STOP_LENTH   sizeof(FBO_DATA_HEAD_STOP)
#define FBO_DATA_HEAD_INFO_LENTH   256

typedef struct _typetag_
{
    quint8 TypeTag0;
    quint8 TypeTag1;
    quint8 TypeTag2;
    quint8 TypeTag3;
}Data_Type;

typedef struct _fbo_data_
{
    Data_Type m_DataType;
    quint16 CRC16;
    TEST_TIME m_TestTime;
    quint8  BattGroup;
    quint16 BattSum;
    quint16 OnlineVol;
    quint16 SumVoltage;
    quint16 SumCurrent;
    quint16 SubCurrent[4];
    quint16 AllCap;
    quint16 SubCap[4];
    quint16 SingleVol[MONOMER_NUM_MAX];
}FBO_DATA;

typedef struct _icon_state_
{
    bool monomerState;
    bool usbState;
    bool wifiState;
}ICON_STATE;

//-----------------param---------------------------------
typedef struct _test_param_xml_tag_
{
    quint16 test_mode;  //在线 离线
    quint16 acstop_op;
    quint16 nominal_cap;
    quint16 hourly_rate;
    quint16 preset_cur;
    quint16 preset_cap;
    quint16 preset_time;
    quint16 mon_lower;
    quint16 group_lower;
    quint16 mon_number;
    quint16 group_number;
    quint16 lower_number;
    quint16 mon_vol;
    quint16 booster_ceiling;    //升压上限
    quint16 charge_limit;       //充电限流
    quint16 temp_High;
    quint16 onlinevol_lowlimit;

    quint16 discharge_mode;//恒流 恒功率
    quint16 preset_power;
}TEST_PARAM_XML;

typedef struct _sys_param_tag_
{
    quint16 save_interval;
    quint16 monomerlow_act;
    quint16 monomer_order;
    quint16 monomer_addrset;
    quint16 monomer_fre;
    quint16 loader_plusEn;
    quint8 tcp_ip[4];
    quint16 tcp_port;

    qint16  OnlineOffVol;
    qint16  GroupOffVol;
}SYS_PARAM;

typedef struct _adj_param_
{
    double onlinevol_slope;
    double groupvol_slope;
    double temp_slope;
}ADJ_PARAM_XML;

//-------------------sysinfo---------------------------------
typedef struct _sys_info_config_tag_
{
    quint16 InnerCurrRange;    //内部电流钳量程
    quint16 ExterCurrRange;    //外部电流钳量程
    quint16 MashineCurr;	   //机器电流
    quint16 DCDC_Count;		   //DCDC模块个数
    quint16 Mashine_Type;	   //机器类型(0-IDCE,1-FBO,2-FBI)

    quint16 MashinePower;	   //机器功率
    quint16 TKQenable;         //脱扣器使能 用于显示 1启用 0禁用

}SYS_CONFIG;


//-----------------others---------------------------------
typedef struct _sys_state_tag
{
    bool  SaveDataEN;
    quint8  TestType;
    quint8  SysWorkState;
    quint8  WP_AlarmState;
    quint16  CapPS;         //每秒累加的容量
    quint16  SubCapPS[4];   //每秒累加的容量
    quint8   OnlineVollow;  //在线电压状态
    quint16  OverChargeTime;//
    quint16  addmark;// 专门用于FBO-4830充电规则3、7
    quint16  addcount;//专门用于FBO-4830充电规则3、7
}SYS_State;

typedef struct _mon_table_
{
    int monPageIndex;   //当前单体页数
    int monGroupIndex;  //当前单体组数
    int monPageNum;     //每组单体页数
    int monGroupNum;    //单体组数
    int monNum;         //每组单体个数
    int pageIndex;      //页数索引（不区分组数时）
}MON_TABLE;

typedef struct _TEST_DATA_
{
    quint16  OnlineVol;    //在线电压
    quint16  GroupVol;     //组端电压
    CT_DATE_TIME CurrTime;
    TEST_TIME testtime;
    quint8 KeyState;
    quint16 monomerCount;
    quint16 curr_cur;
    quint16 AllCap;
    quint16  SMaxIndex;
    quint16  SMaxVol;
    quint16  SMinIndex;
    quint16  SMinVol;
    quint16  dischgTimes;
    quint8  HighTemp;
    quint8  LowTTemp;

    quint8  reserved[16];
}TEST_DATA;

typedef struct _ADJ_DATA_
{
    quint16 OnlineVol;
    quint16 GroupVol;
    quint16 dis_cur;
    quint16 chr_cur;
    quint16 out_cur;
}ADJ_DATA;

typedef struct _FILE_LIST_DATA_
{
    quint8 TotalFileNum;
    quint8 CurrFileIndex;
    CT_DATE_TIME TestStartTime;
    TEST_TIME TestTimeLong;
    quint8 DataType;
    quint16 TestCur;
    quint16 TestCap;
    quint16 STDCap;
    quint16 MVLLimit;
    quint16 SumVLLimit;
    quint16 BattSum;
    quint16 BattGroup;
    quint8 StopType;
    quint8 MonomerVol;
}FILE_LIST_DATA;

typedef struct _mon_data_
{
    quint16 GroupVol[4];
    quint16 GroupCur[4];
    quint16 BattStatus[4];
    quint16 reserved[4];
    quint16 MonomerVol[MONOMER_NUM_MAX];
}MON_DATA;

typedef struct _slave_tcp_
{
    quint8 ID;
    quint8 mode;//0服务端 1//客户端
    quint8 heart_cnt;
    quint8 Enter_ctrl;

}TCP_CTRL;

typedef struct _MASTER_DATA_
{
    quint8 heart_cnt;
    quint8 Interface;
    quint8 workState;
    quint8 Alarm;
    quint8 Enter_ctrl;
    MON_DATA Cell_data;
    TEST_DATA test_data;
    ADJ_DATA adj_data;
}MASTER_DATA;

typedef struct _slave_rs485_
{
    quint8 heart_cnt;
    quint8 Enter_ctrl;
}RS485_SLAVE_CTRL;

typedef struct _dcdc_data
{
    quint16 DC_Alarm;
    quint16 DC_Cur;
    quint16 DC_Vol;
    quint16 TX;
    quint16 RX;
}DCDC_DATA;

typedef struct _local_data_
{
    quint16  SoftVersion; //软件版本
    quint16  OnlineVol;    //在线电压
    quint16  GroupVol;     //组端电压
    quint16  InnerCurrVal;    //内部电流值
    quint16  InnerCurrDir;      //内部电流方向
    quint16  ExterCurrVal;      //外部电流值
    quint16  ExterCurrDir;      //外部电流方向
    quint16  Temp;              //温度

    quint16  AlarmState;        //告警状态

    quint16  RLY_OK;            //ROK状态

    quint16  PWM1_Value;        //PWM1值
    quint16  PWM2_Value;        //PWM2值
    quint16  PWM3_Value;        //PWM3值

    quint16  ModuleDropIndex;   //XX号单体模块异常

    quint16  Reserved[7];       //Reserved

    quint16  Work_State;       //运行状态 用于停电\黑屏区分

    quint16  SMaxIndex[4];      //最高单体索引
    quint16  SMinIndex[4];      //最低单体索引
    quint16  SMaxVol[4];        //最高单体
    quint16  SMinVol[4];        //最低单体

    DCDC_DATA dcdc_data[4];     //DCDC模块数据

    quint16  monomerLowCount;

    quint8   SysWorkState;
    quint8   WPAlarmState;

    quint16  SingleRemainCap[MONOMER_NUM_MAX]; //单体剩余容量
    quint16  GroupRemainCap[4];  //整组剩余容量
    quint16  SingleRes[MONOMER_NUM_MAX];  //单体内阻

    /*
    1:启动放电/充电时，都置为0；从参数界面进去都置为0；
    2:内阻值是变动的，放电时有内阻值，每2个相近时段计算出一个内阻值；
    */
    MASTER_DATA master_data;
    TCP_CTRL tcp_ctrl;
    RS485_SLAVE_CTRL rs485_ctrl;
    RS485_SLAVE_CTRL rs485_pc;
    quint8   TestType;
    quint8   deviceTestType;
    quint8   pauseBtnState;
    quint8   SlaveMode;
    quint8   Interface;
    quint8   popBox;
    quint8   dischgTimes;
    quint16  waitTimeCount;

}LOCAL_DATA;

typedef struct _comm_test_param_tag_
{
    quint16 test_mode;              //放电模式 在线 离线
    quint16 acstop_op;              //停电处理
    quint16 nominal_cap;            ////标称容量 范围0-9999AH
    quint16 hourly_rate;            //小时率
    quint16 preset_cur;             //放电电流, 范围1-150A
    quint16 preset_cap;             //放电容量 范围0-9999AH
    quint16 preset_time;            //预放时间 分钟单位，没用限定范围
    quint16 mon_lower;              //单体下限 分辨率0.01,范围0-20V
    quint16 group_lower;            //组端下限 分辨率0.1,范围1-285V
    quint16 mon_number;             //单体数量 1-300
    quint16 group_number;			//组数 不可设值，目前为1
    quint16 lower_number;			//下限个数 范围1至单体总数
    quint16 mon_vol;				//只取值1.2, 2.0，6.0，12.0，3.2，3.7

    quint16 dischg_mode; //放电模式:0恒流放电 		1恒功率放电
    quint16 pre_power;   //预放功率	  范围0-7.5kw
    quint16 pre_res;	//放电阻值

    quint16 chrg_curr;   //充电电流//范围1-100A
    quint16 chrg_vol;    //充电电压//范围1-285V
    quint16 chrg_vol_2;  //浮充电压//范围小于充电电压
    quint16 chrg_cap;    //充电容量
    quint16 chrg_time;   //充电时长  范围没有限制
    quint16 chrg_time_2;   //浮充时长  范围没有限制
    quint16 chrg_stopcurr; //截止电流		小于充电电流
    quint16 grp_uppervol;   //组端上限	不可设置，比充电电压大5V
    quint16 mon_uppervol;  //单体上限	分辨率0.01，范围0-16V
    quint16 mon_uppernum;  //单体上限数量		范围大于0，小于单体总数

    quint16 chrg_temp;     //充电过温
    quint16 dischrg_temp;     //放电过温

    quint16 cycle_start;   //活化起点 0放电 ，1充电
    quint16 cycle_times;   //活化次数	1-50次
    quint16 waitdis_time;  //充完静置	0-500分钟
    quint16 waitchr_time;  //放完静置	0-500分钟

    quint16  Reserved[10];//预留

}COMM_TEST_PARAM;


typedef struct RFData_tag
{
    quint8 Addr[4];
    quint16 CMD;
    quint16 VolData[4];
    quint16 CRC;
}RFData;
typedef struct Rx_Data
{
    quint16 Addr;
    quint16 VolData[4];
}Rx_Data_RF;

#pragma pack(1)
typedef struct _FRAME_DATA_
{
    quint32 SYNCode;
    quint16 Len;
    quint16 CMD;
    quint8 RecState;    //RTN
    quint8 type;        //Cid1
    quint8 workState;   //Cid2
    quint8 Alarm;
    quint8 Db1;       //预留
    quint8 Db2;
    quint8 Db3;
    quint8 Db4;
    quint16 CRC;
    quint8 info[1056];
}FRAME_DATA;
#pragma pack()
#endif // DATA_DEFINE_H