/*!
|
\file cdc_acm_core.c
|
\brief CDC ACM driver
|
|
\version 2020-08-01, V3.0.0, firmware for GD32F30x
|
*/
|
|
/*
|
Copyright (c) 2020, GigaDevice Semiconductor Inc.
|
|
Redistribution and use in source and binary forms, with or without modification,
|
are permitted provided that the following conditions are met:
|
|
1. Redistributions of source code must retain the above copyright notice, this
|
list of conditions and the following disclaimer.
|
2. Redistributions in binary form must reproduce the above copyright notice,
|
this list of conditions and the following disclaimer in the documentation
|
and/or other materials provided with the distribution.
|
3. Neither the name of the copyright holder nor the names of its contributors
|
may be used to endorse or promote products derived from this software without
|
specific prior written permission.
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
|
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
|
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
|
OF SUCH DAMAGE.
|
*/
|
|
#include "usbd_transc.h"
|
#include "cdc_acm_core.h"
|
|
#define USBD_VID 0x28E9U
|
#define USBD_PID 0x018AU
|
|
/* note:it should use the C99 standard when compiling the below codes */
|
/* USB standard device descriptor */
|
usb_desc_dev cdc_dev_desc =
|
{
|
.header =
|
{
|
.bLength = USB_DEV_DESC_LEN,
|
.bDescriptorType = USB_DESCTYPE_DEV,
|
},
|
.bcdUSB = 0x0200U,
|
.bDeviceClass = USB_CLASS_CDC,
|
.bDeviceSubClass = 0x00U,
|
.bDeviceProtocol = 0x00U,
|
.bMaxPacketSize0 = USBD_EP0_MAX_SIZE,
|
.idVendor = USBD_VID,
|
.idProduct = USBD_PID,
|
.bcdDevice = 0x0100U,
|
.iManufacturer = STR_IDX_MFC,
|
.iProduct = STR_IDX_PRODUCT,
|
.iSerialNumber = STR_IDX_SERIAL,
|
.bNumberConfigurations = USBD_CFG_MAX_NUM,
|
};
|
|
/* USB device configuration descriptor */
|
usb_cdc_desc_config_set cdc_config_desc =
|
{
|
.config =
|
{
|
.header =
|
{
|
.bLength = sizeof(usb_desc_config),
|
.bDescriptorType = USB_DESCTYPE_CONFIG,
|
},
|
.wTotalLength = USB_CDC_ACM_CONFIG_DESC_SIZE,
|
.bNumInterfaces = 0x02U,
|
.bConfigurationValue = 0x01U,
|
.iConfiguration = 0x00U,
|
.bmAttributes = 0x80U,
|
.bMaxPower = 0x32U
|
},
|
|
.cmd_itf =
|
{
|
.header =
|
{
|
.bLength = sizeof(usb_desc_itf),
|
.bDescriptorType = USB_DESCTYPE_ITF
|
},
|
.bInterfaceNumber = 0x00U,
|
.bAlternateSetting = 0x00U,
|
.bNumEndpoints = 0x01U,
|
.bInterfaceClass = USB_CLASS_CDC,
|
.bInterfaceSubClass = USB_CDC_SUBCLASS_ACM,
|
.bInterfaceProtocol = USB_CDC_PROTOCOL_AT,
|
.iInterface = 0x00U
|
},
|
|
.cdc_header =
|
{
|
.header =
|
{
|
.bLength = sizeof(usb_desc_header_func),
|
.bDescriptorType = USB_DESCTYPE_CS_INTERFACE
|
},
|
.bDescriptorSubtype = 0x00U,
|
.bcdCDC = 0x0110U
|
},
|
|
.cdc_call_managment =
|
{
|
.header =
|
{
|
.bLength = sizeof(usb_desc_call_managment_func),
|
.bDescriptorType = USB_DESCTYPE_CS_INTERFACE
|
},
|
.bDescriptorSubtype = 0x01U,
|
.bmCapabilities = 0x00U,
|
.bDataInterface = 0x01U
|
},
|
|
.cdc_acm =
|
{
|
.header =
|
{
|
.bLength = sizeof(usb_desc_acm_func),
|
.bDescriptorType = USB_DESCTYPE_CS_INTERFACE
|
},
|
.bDescriptorSubtype = 0x02U,
|
.bmCapabilities = 0x02U,
|
},
|
|
.cdc_union =
|
{
|
.header =
|
{
|
.bLength = sizeof(usb_desc_union_func),
|
.bDescriptorType = USB_DESCTYPE_CS_INTERFACE
|
},
|
.bDescriptorSubtype = 0x06U,
|
.bMasterInterface = 0x00U,
|
.bSlaveInterface0 = 0x01U,
|
},
|
|
.cdc_cmd_endpoint =
|
{
|
.header =
|
{
|
.bLength = sizeof(usb_desc_ep),
|
.bDescriptorType = USB_DESCTYPE_EP,
|
},
|
.bEndpointAddress = CDC_CMD_EP,
|
.bmAttributes = USB_EP_ATTR_INT,
|
.wMaxPacketSize = CDC_ACM_CMD_PACKET_SIZE,
|
.bInterval = 0x0AU
|
},
|
|
.cdc_data_interface =
|
{
|
.header =
|
{
|
.bLength = sizeof(usb_desc_itf),
|
.bDescriptorType = USB_DESCTYPE_ITF,
|
},
|
.bInterfaceNumber = 0x01U,
|
.bAlternateSetting = 0x00U,
|
.bNumEndpoints = 0x02U,
|
.bInterfaceClass = USB_CLASS_DATA,
|
.bInterfaceSubClass = 0x00U,
|
.bInterfaceProtocol = USB_CDC_PROTOCOL_NONE,
|
.iInterface = 0x00U
|
},
|
|
.cdc_out_endpoint =
|
{
|
.header =
|
{
|
.bLength = sizeof(usb_desc_ep),
|
.bDescriptorType = USB_DESCTYPE_EP,
|
},
|
.bEndpointAddress = CDC_OUT_EP,
|
.bmAttributes = USB_EP_ATTR_BULK,
|
.wMaxPacketSize = CDC_ACM_DATA_PACKET_SIZE,
|
.bInterval = 0x00U
|
},
|
|
.cdc_in_endpoint =
|
{
|
.header =
|
{
|
.bLength = sizeof(usb_desc_ep),
|
.bDescriptorType = USB_DESCTYPE_EP
|
},
|
.bEndpointAddress = CDC_IN_EP,
|
.bmAttributes = USB_EP_ATTR_BULK,
|
.wMaxPacketSize = CDC_ACM_DATA_PACKET_SIZE,
|
.bInterval = 0x00U
|
}
|
};
|
|
/* USB language ID descriptor */
|
static usb_desc_LANGID usbd_language_id_desc =
|
{
|
.header =
|
{
|
.bLength = sizeof(usb_desc_LANGID),
|
.bDescriptorType = USB_DESCTYPE_STR,
|
},
|
.wLANGID = ENG_LANGID
|
};
|
|
/* USB manufacture string */
|
static usb_desc_str manufacturer_string =
|
{
|
.header =
|
{
|
.bLength = USB_STRING_LEN(10U),
|
.bDescriptorType = USB_DESCTYPE_STR,
|
},
|
.unicode_string = {'G', 'i', 'g', 'a', 'D', 'e', 'v', 'i', 'c', 'e'}
|
};
|
|
/* USB product string */
|
static usb_desc_str product_string =
|
{
|
.header =
|
{
|
.bLength = USB_STRING_LEN(12U),
|
.bDescriptorType = USB_DESCTYPE_STR,
|
},
|
.unicode_string = {'G', 'D', '3', '2', '-', 'C', 'D', 'C', '_', 'A', 'C', 'M'}
|
};
|
|
/* USBD serial string */
|
static usb_desc_str serial_string =
|
{
|
.header =
|
{
|
.bLength = USB_STRING_LEN(12U),
|
.bDescriptorType = USB_DESCTYPE_STR,
|
}
|
};
|
|
/* USB string descriptor set */
|
uint8_t* usbd_cdc_strings[] =
|
{
|
[STR_IDX_LANGID] = (uint8_t *)&usbd_language_id_desc,
|
[STR_IDX_MFC] = (uint8_t *)&manufacturer_string,
|
[STR_IDX_PRODUCT] = (uint8_t *)&product_string,
|
[STR_IDX_SERIAL] = (uint8_t *)&serial_string
|
};
|
|
usb_desc cdc_desc = {
|
.dev_desc = (uint8_t *)&cdc_dev_desc,
|
.config_desc = (uint8_t *)&cdc_config_desc,
|
.strings = usbd_cdc_strings
|
};
|
|
/* local function prototypes ('static') */
|
static uint8_t cdc_acm_init (usb_dev *udev, uint8_t config_index);
|
static uint8_t cdc_acm_deinit (usb_dev *udev, uint8_t config_index);
|
static uint8_t cdc_acm_req_handler (usb_dev *udev, usb_req *req);
|
static uint8_t cdc_acm_ctlx_out (usb_dev *udev);
|
static void cdc_acm_data_in (usb_dev *udev, uint8_t ep_num);
|
static void cdc_acm_data_out (usb_dev *udev, uint8_t ep_num);
|
|
usb_class cdc_class = {
|
.req_cmd = NO_CMD,
|
|
.init = cdc_acm_init,
|
.deinit = cdc_acm_deinit,
|
.req_process = cdc_acm_req_handler,
|
.ctlx_out = cdc_acm_ctlx_out,
|
.data_in = cdc_acm_data_in,
|
.data_out = cdc_acm_data_out
|
};
|
|
/*!
|
\brief receive CDC ACM data
|
\param[in] udev: pointer to USB device instance
|
\param[out] none
|
\retval USB device operation status
|
*/
|
void cdc_acm_data_receive(usb_dev *udev)
|
{
|
usb_cdc_handler *cdc = (usb_cdc_handler *)udev->class_data[CDC_COM_INTERFACE];
|
|
cdc->packet_receive = 0U;
|
cdc->pre_packet_send = 0U;
|
|
usbd_ep_recev(udev, CDC_OUT_EP, (uint8_t*)(cdc->data), USB_CDC_RX_LEN);
|
}
|
|
/*!
|
\brief send CDC ACM data
|
\param[in] udev: pointer to USB device instance
|
\param[out] none
|
\retval USB device operation status
|
*/
|
void cdc_acm_data_send (usb_dev *udev)
|
{
|
usb_cdc_handler *cdc = (usb_cdc_handler *)udev->class_data[CDC_COM_INTERFACE];
|
uint32_t data_len = cdc->receive_length;
|
|
if ((0U != data_len) && (1U == cdc->packet_sent)) {
|
cdc->packet_sent = 0U;
|
usbd_ep_send(udev, CDC_IN_EP, (uint8_t*)(cdc->data), (uint16_t)data_len);
|
cdc->receive_length = 0U;
|
}
|
}
|
|
/*!
|
\brief check cdc acm is ready for data transfer
|
\param[in] udev: pointer to USB device instance
|
\param[out] none
|
\retval 0 if CDC is ready, 5 otherwise
|
*/
|
uint8_t cdc_acm_check_ready(usb_dev *udev)
|
{
|
if (udev->class_data[CDC_COM_INTERFACE] != NULL) {
|
usb_cdc_handler *cdc = (usb_cdc_handler *)udev->class_data[CDC_COM_INTERFACE];
|
|
if ((1U == cdc->packet_receive) && (1U == cdc->pre_packet_send)) {
|
return 0U;
|
}
|
}
|
|
return 5U;
|
}
|
|
/*!
|
\brief initialize the CDC ACM device
|
\param[in] udev: pointer to USB device instance
|
\param[in] config_index: configuration index
|
\param[out] none
|
\retval USB device operation status
|
*/
|
static uint8_t cdc_acm_init (usb_dev *udev, uint8_t config_index)
|
{
|
static usb_cdc_handler cdc_handler;
|
|
/* initialize the data endpoints */
|
usbd_ep_init(udev, EP_BUF_SNG, BULK_TX_ADDR, &(cdc_config_desc.cdc_in_endpoint));
|
usbd_ep_init(udev, EP_BUF_SNG, BULK_RX_ADDR, &(cdc_config_desc.cdc_out_endpoint));
|
|
/* initialize the command endpoint */
|
usbd_ep_init(udev, EP_BUF_SNG, INT_TX_ADDR, &(cdc_config_desc.cdc_cmd_endpoint));
|
|
udev->ep_transc[EP_ID(CDC_IN_EP)][TRANSC_IN] = cdc_class.data_in;
|
udev->ep_transc[CDC_OUT_EP][TRANSC_OUT] = cdc_class.data_out;
|
|
/* initialize cdc handler structure */
|
cdc_handler.packet_receive = 0U;
|
cdc_handler.packet_sent = 1U;
|
cdc_handler.pre_packet_send = 1U;
|
cdc_handler.receive_length = 0U;
|
|
cdc_handler.line_coding = (acm_line){
|
.dwDTERate = 115200U,
|
.bCharFormat = 0U,
|
.bParityType = 0U,
|
.bDataBits = 0x08U
|
};
|
|
udev->class_data[CDC_COM_INTERFACE] = (void *)&cdc_handler;
|
|
return USBD_OK;
|
}
|
|
/*!
|
\brief de-initialize the CDC ACM device
|
\param[in] udev: pointer to USB device instance
|
\param[in] config_index: configuration index
|
\param[out] none
|
\retval USB device operation status
|
*/
|
static uint8_t cdc_acm_deinit (usb_dev *udev, uint8_t config_index)
|
{
|
/* deinitialize the data endpoints */
|
usbd_ep_deinit(udev, CDC_IN_EP);
|
usbd_ep_deinit(udev, CDC_OUT_EP);
|
|
/* deinitialize the command endpoint */
|
usbd_ep_deinit(udev, CDC_CMD_EP);
|
|
return USBD_OK;
|
}
|
|
/*!
|
\brief command data received on control endpoint
|
\param[in] udev: pointer to USB device instance
|
\param[out] none
|
\retval USB device operation status
|
*/
|
static uint8_t cdc_acm_ctlx_out (usb_dev *udev)
|
{
|
usb_cdc_handler *cdc = (usb_cdc_handler *)udev->class_data[CDC_COM_INTERFACE];
|
|
if (NO_CMD != udev->class_core->req_cmd) {
|
cdc->packet_receive = 1U;
|
cdc->pre_packet_send = 1U;
|
|
udev->class_core->req_cmd = NO_CMD;
|
}
|
|
return USBD_OK;
|
}
|
|
|
/*!
|
\brief handle CDC ACM data in transaction
|
\param[in] udev: pointer to USB device instance
|
\param[in] ep_num: endpoint number
|
\param[out] none
|
\retval USB device operation status
|
*/
|
static void cdc_acm_data_in (usb_dev *udev, uint8_t ep_num)
|
{
|
usb_transc *transc = &udev->transc_in[ep_num];
|
usb_cdc_handler *cdc = (usb_cdc_handler *)udev->class_data[CDC_COM_INTERFACE];
|
|
if (transc->xfer_count == transc->max_len) {
|
usbd_ep_send(udev, EP_ID(ep_num), NULL, 0U);
|
} else {
|
cdc->packet_sent = 1U;
|
cdc->pre_packet_send = 1U;
|
}
|
}
|
|
/*!
|
\brief handle CDC ACM data out transaction
|
\param[in] udev: pointer to USB device instance
|
\param[in] ep_num: endpoint number
|
\param[out] none
|
\retval USB device operation status
|
*/
|
static void cdc_acm_data_out (usb_dev *udev, uint8_t ep_num)
|
{
|
usb_cdc_handler *cdc = (usb_cdc_handler *)udev->class_data[CDC_COM_INTERFACE];
|
|
cdc->packet_receive = 1U;
|
|
cdc->receive_length = udev->transc_out[ep_num].xfer_count;
|
}
|
|
/*!
|
\brief handle the CDC ACM class-specific requests
|
\param[in] udev: pointer to USB device instance
|
\param[in] req: device class-specific request
|
\param[out] none
|
\retval USB device operation status
|
*/
|
static uint8_t cdc_acm_req_handler (usb_dev *udev, usb_req *req)
|
{
|
uint8_t status = REQ_NOTSUPP, noti_buf[10] = {0U};
|
usb_cdc_handler *cdc = (usb_cdc_handler *)udev->class_data[CDC_COM_INTERFACE];
|
|
acm_notification *notif = (void *)noti_buf;
|
|
switch (req->bRequest) {
|
case SEND_ENCAPSULATED_COMMAND:
|
break;
|
|
case GET_ENCAPSULATED_RESPONSE:
|
break;
|
|
case SET_COMM_FEATURE:
|
break;
|
|
case GET_COMM_FEATURE:
|
break;
|
|
case CLEAR_COMM_FEATURE:
|
break;
|
|
case SET_LINE_CODING:
|
/* set the value of the current command to be processed */
|
udev->class_core->req_cmd = req->bRequest;
|
|
usb_transc_config(&udev->transc_out[0U], (uint8_t *)&cdc->line_coding, req->wLength, 0U);
|
|
status = REQ_SUPP;
|
break;
|
|
case GET_LINE_CODING:
|
usb_transc_config(&udev->transc_in[0U], (uint8_t *)&cdc->line_coding, 7U, 0U);
|
|
status = REQ_SUPP;
|
break;
|
|
case SET_CONTROL_LINE_STATE:
|
notif->bmRequestType = 0xA1U;
|
notif->bNotification = USB_CDC_NOTIFY_SERIAL_STATE;
|
notif->wIndex = 0U;
|
notif->wValue = 0U;
|
notif->wLength = 2U;
|
noti_buf[8] = (uint8_t)req->wValue & 3U;
|
noti_buf[9] = 0U;
|
|
status = REQ_SUPP;
|
break;
|
|
case SEND_BREAK:
|
break;
|
|
default:
|
break;
|
}
|
|
return status;
|
}
|
