package com.whyc.dto;
|
|
|
import com.whyc.util.ActionUtil;
|
|
import java.io.File;
|
import java.io.IOException;
|
import java.io.InputStream;
|
|
public class BattTestData {
|
final public static int BATT_MON_COUNT_MAX = 512;
|
|
final public static int AppServer_Reinit_BattGroupData_EN=1;//修改删除添加电池组信息时识别信号
|
|
final public static byte BATTDATA_NULL = 0;
|
final public static byte BATTDATA_FLOAT = 1;
|
final public static byte BATTDATA_CHARGE = 2;
|
final public static byte BATTDATA_DISCHARGE = 3;
|
final public static byte BATTDATA_JUNCHARGE = 4;
|
final public static byte BATTDATA_RES = 5;
|
final public static byte BATTDATA_SER = 6;
|
final public static byte BATTDATA_TMP = 7;
|
final public static byte BATTDATA_CONNRES = 8;
|
final public static byte BATTDATA_MONITOR = 9;
|
|
final public static byte BATTSTATE_NULL = 0;
|
final public static byte BATTSTATE_FLOAT = 1;
|
final public static byte BATTSTATE_CHARGE = 2;
|
final public static byte BATTSTATE_DISCHARGE = 3;
|
final public static byte BATTSTATE_JUNCHARGE = 4;
|
|
final public static byte TEST_LOADER_REALLOADER = 1;
|
final public static byte TEST_LOADER_FBI_IDCE = 2;
|
final public static byte TEST_LOADER_FBS9100S =3;
|
|
public static final byte MonData_CapVol = 0;
|
public static final byte MonData_RealCap = 1;
|
public static final byte MonData_RestCap = 2;
|
public static final byte MonData_CapPercent = 3;
|
public static final byte MonData_Vol = 4;
|
public static final byte MonData_Res = 5;
|
public static final byte MonData_Ser = 6;
|
public static final byte MonData_Tmp = 7;
|
public static final byte MonData_ConnRes = 8;
|
public static final byte MonData_SerPercent = 9;
|
|
public static final String CM="_CM";//移动
|
public static final String CT="_CT";//电信
|
public static final String CU="_CU";//联通
|
|
public static final String test_type0 ="无";//无
|
public static final String test_type1 ="浮充";
|
public static final String test_type2 ="充电";
|
public static final String test_type3 ="放电";
|
public static final String test_type4 ="均充";
|
public static final String test_type5 ="电导/内阻";
|
public static final String test_type6 ="电导";
|
public static final String test_type7 ="温度";
|
public static final String test_type8 ="连接条";
|
public static final String test_type9 ="在线监测";
|
|
//放电计划状态的对应关系
|
public static final int test_plan0 = 0;//未放电
|
public static final int test_plan1 = 1;//放电延时
|
public static final int test_plan2 = 2;//放电完成
|
public static final int test_plan3 = 3;//放电进行中
|
public static final int test_plan4 = 4;//放电失败
|
|
public static final int hoursBetween = 72;//俩次放电计划相隔时间
|
|
public static final int RC_NUM_PARAM=1000;//最多一千笔
|
|
public static final int RC_NUM_Real = 1000;//最多一千笔
|
|
//电池放电测试弹出框中显示排行前几个内阻数据
|
public static final int mon_res_num=10;
|
//启动创建数据库的jar文件
|
public static void run_cmdOld() {
|
String path=System.getProperty("user.dir");
|
String realapth=path.substring(0,path.lastIndexOf("\\"));
|
//System.out.println(realapth);
|
String strcmd="cmd /c start "+realapth+"/webapps/cmd_BTSE_DB_Builder.cmd";
|
//
|
Runtime rt = Runtime.getRuntime(); //Runtime.getRuntime()返回当前应用程序的Runtime对象
|
Process ps = null; //Process可以控制该子进程的执行或获取该子进程的信息。
|
try {
|
ps = rt.exec(strcmd); //该对象的exec()方法指示Java虚拟机创建一个子进程执行指定的可执行程序，并返回与该子进程对应的Process对象实例。
|
ps.waitFor(); //等待子进程完成再往下执行。
|
} catch (IOException e1) {
|
e1.printStackTrace();
|
} catch (InterruptedException e) {
|
e.printStackTrace();
|
}
|
|
int i = ps.exitValue(); //接收执行完毕的返回值
|
if (i == 0) {
|
System.out.println("执行完成.");
|
} else {
|
System.out.println("执行失败.");
|
}
|
|
ps.destroy(); //销毁子进程
|
ps = null;
|
}
|
|
//启动创建数据库的jar文件
|
public static void run_cmd() {
|
//String path=System.getProperty("user.dir"); //myeclipse中获取的目录(获取到的是tomcat/bin)和分离项目获取到的路径(tomcat)不一样
|
String fullRealPath = ActionUtil.getSession().getServletContext().getRealPath("/");
|
String path = fullRealPath.split(File.separator+"webapps")[0];
|
System.out.println("tomcat的路径为"+path);
|
//识别服务器的系统类型
|
String OS = System.getProperty("os.name").toLowerCase();
|
// System.out.println(OS);
|
String strcmd="";
|
if(OS.contains("window")) {
|
String realapth=path.substring(0,path.lastIndexOf("\\"));
|
strcmd="cmd /c start "+realapth+"/webapps/cmd_BTSE_DB_Builder.cmd";
|
String batPath = realapth+"/webapps/cmd_BTSE_DB_Builder.cmd";
|
File f = new File(path);
|
//System.out.println("File :"+f.getParentFile().getAbsolutePath()+File.separator+"Batt_MS_FBSDEV_X64/Batt_MS_FBSDEV/"+"cmd_BTSE_DB_Builder.cmd");
|
//batPath = f.getParentFile().getAbsolutePath()+File.separator+"Batt_MS_FBSDEV_X64/Batt_MS_FBSDEV/"+"cmd_BTSE_DB_Builder.cmd";
|
String jarPath = "";
|
if(path.endsWith("bin")){
|
f = f.getParentFile();
|
}
|
|
jarPath = f.getParentFile().getAbsolutePath()+File.separator+"Batt_MS_FBSDEV_X64/Batt_MS_FBSDEV/"+"BTSE_DB_Builder.exe"; //主程序中jar的目录
|
System.out.println("jar执行文件全路径为:"+jarPath);
|
//strcmd = "cmd /c start "+batPath;
|
strcmd = ("cmd /c start ")+jarPath.replaceAll(" ", "\" \"");
|
}else {
|
strcmd="java -jar /app/BTSE_DB_Builder.jar";
|
}
|
//System.out.println(path);
|
//修复绝对路径中存在空格时执行不成功bug
|
Process child = null;
|
InputStream in = null;
|
try {
|
//System.out.println(strcmd);
|
child = Runtime.getRuntime().exec(strcmd);
|
in = child.getInputStream();
|
int c;
|
while ((c = in.read()) != -1) {
|
//System.out.print((char)c);
|
}
|
in.close();
|
try {
|
child.waitFor();
|
} catch (InterruptedException e) {
|
e.printStackTrace();
|
}
|
//System.out.println("Run Bat OK....");
|
} catch (IOException e) {
|
e.printStackTrace();
|
}
|
}
|
|
//落后单体参数（组端电压>标称*test_stop）
|
public static final float test_stop = 0.9f;
|
//判断电池组的当前状态
|
public static String battState(int num){
|
String state="";
|
switch (num) {
|
case 0:state= BattTestData.test_type0;break;
|
case 1:state= BattTestData.test_type1;break;
|
case 2:state= BattTestData.test_type2;break;
|
case 3:state= BattTestData.test_type3;break;
|
case 4:state= BattTestData.test_type4;break;
|
case 5:state= BattTestData.test_type5;break;
|
case 6:state= BattTestData.test_type6;break;
|
case 7:state= BattTestData.test_type7;break;
|
case 8:state= BattTestData.test_type8;break;
|
case 9:state= BattTestData.test_type9;break;
|
}
|
return state;
|
}
|
|
//bts放电终止原因
|
public static String getStopType(int dev_type, int stop_type_t)
|
{
|
String stop_type = "未知";
|
if(BattTestData.TEST_LOADER_FBI_IDCE == dev_type) {
|
switch(stop_type_t)
|
{
|
case 0 : stop_type = "手动停止"; break;
|
case 1 : stop_type = "放电时间到"; break;
|
case 2 : stop_type = "放电容量到"; break;
|
case 3 : stop_type = "单体下限到"; break;
|
case 4 : stop_type = "组端下限到"; break;
|
case 5 : stop_type = "市电中断"; break;
|
case 6 : stop_type = "内存不足"; break;
|
case 7 : stop_type = "温度异常"; break;
|
}
|
} else if(BattTestData.TEST_LOADER_FBS9100S == dev_type){
|
switch(stop_type_t)
|
{
|
case 0 : stop_type = "手动停止"; break;
|
case 1 : stop_type = "暂停"; break;
|
case 2 : stop_type = "正在放电测试"; break;
|
case 3 : stop_type = "正在等待放电"; break;
|
case 4 : stop_type = "正在限流充电"; break;
|
case 5 : stop_type = "正在直连充电"; break;
|
case 6 : stop_type = "正在等待充电"; break;
|
case 7 : stop_type = "放电时间到"; break;
|
case 8 : stop_type = "放电容量到"; break;
|
case 9 : stop_type = "单体下限到"; break;
|
case 10 : stop_type = "组端下限到"; break;
|
case 11 : stop_type = "市电中断停止"; break;
|
case 12 : stop_type = "存储数据满"; break;
|
case 13 : stop_type = "机内温度异常"; break;
|
case 14 : stop_type = "放电电流过流"; break;
|
case 15 : stop_type = "后台通信中断"; break;
|
case 16 : stop_type = "负载模块中断"; break;
|
case 17 : stop_type = "在线模块中断"; break;
|
case 18 : stop_type = "负载模块过功率"; break;
|
case 19 : stop_type = "内部程序异常"; break;
|
}
|
} else {
|
stop_type = "手动停止";
|
}
|
return stop_type;
|
}
|
//61850放电终止原因
|
public static String getStopType_6185(int stop_type_t)
|
{
|
String stop_type = "其他";
|
switch(stop_type_t)
|
{
|
case 0 : stop_type = "设备掉电终止"; break;
|
case 1 : stop_type = "手动终止"; break;
|
case 2 : stop_type = "放电时间到终止"; break;
|
case 3 : stop_type = "放电容量到终止"; break;
|
case 4 : stop_type = "单体电压下限到终止"; break;
|
case 5 : stop_type = "单体温度上限到终止"; break;
|
case 6 : stop_type = "组端电压下限到终止"; break;
|
case 7 : stop_type = "市电中断终止"; break;
|
case 8 : stop_type = "单体模块通讯异常终止"; break;
|
case 9 : stop_type = "存储数据满终止"; break;
|
case 10 : stop_type = "机内温度异常终止"; break;
|
case 11 : stop_type = "放电电流异常终止"; break;
|
case 12 : stop_type = "后台通讯中断终止"; break;
|
case 13 : stop_type = "内部程序异常终止"; break;
|
case 14 : stop_type = "电源电压高终止"; break;
|
case 15 : stop_type = "协转通讯异常"; break;
|
case 16 : stop_type = "其他"; break;
|
case 27 : stop_type = "其他设备在工作"; break;
|
case 28 : stop_type = "其他设备故障停止"; break;
|
case 29 : stop_type = "电压过高或过低"; break;
|
case 30 : stop_type = "干接点故障"; break;
|
case 31 : stop_type = "单体异常"; break;
|
case 32 : stop_type = "电压输入过高或过低"; break;
|
case 33 : stop_type = "电池电流异常"; break;
|
case 34 : stop_type = "kd测试故障"; break;
|
case 35 : stop_type = "切换装置通信异常"; break;
|
case 36 : stop_type = "切换装置故障"; break;
|
case 37 : stop_type = "切换装置接触器异常"; break;
|
case 100 : stop_type = "未知"; break;
|
}
|
return stop_type;
|
}
|
|
public static String getStopType_9110(int stop_type_t){
|
String stop_type = "未知";
|
switch (stop_type_t){
|
case 0 : stop_type = "手动停止"; break;
|
case 1 : stop_type = "暂停"; break;
|
case 2 : stop_type = "正在放电测试"; break;
|
case 3 : stop_type = "正在等待放电"; break;
|
case 4 : stop_type = "正在限流充电"; break;
|
case 5 : stop_type = "正在直流充电"; break;
|
case 6 : stop_type = "正在等待充电"; break;
|
case 7 : stop_type = "放电时间到停止"; break;
|
case 8 : stop_type = "放电容量到停止"; break;
|
case 9 : stop_type = "单体电压下限到停止"; break;
|
case 10: stop_type = "组端电压下限到停止"; break;
|
case 11: stop_type = "市电中断停止"; break;
|
case 12: stop_type = "存储数据满停止"; break;
|
case 13: stop_type = "机内温度异常停止"; break;
|
case 14: stop_type = "放电电流过流停止"; break;
|
case 15:stop_type = "后台通信中断停止"; break;
|
case 16: stop_type = "负载模块通信中断停止"; break;
|
case 17: stop_type = "选择模块通信中断停止"; break;
|
case 18: stop_type = "负载模块放电过功率停止"; break;
|
case 19: stop_type = "内部程序异常停止"; break;
|
case 20: stop_type = "市电恢复停止升压放电"; break;
|
case 21: stop_type = "充电过程中市电中断"; break;
|
case 22: stop_type = "合路器放电功能组端电压下限到"; break;
|
case 23: stop_type = "单体温度上限到停止"; break;
|
case 24: stop_type = "在线电压异常高停止"; break;
|
case 25: stop_type = "协转通信异常停止"; break;
|
case 26: stop_type = "单体通信异常停止"; break;
|
case 27: stop_type = "LRBH模块通信故障"; break;
|
case 28: stop_type = "LRBH接触器异常"; break;
|
case 29: stop_type = "设备风扇工作异常"; break;
|
}
|
return stop_type;
|
}
|
|
//4016放电终止原因
|
public static String getStopType_4016(int stop_type_t)
|
{
|
String stop_type = "其他";
|
switch(stop_type_t)
|
{
|
case 0 : stop_type = "无"; break;
|
case 1 : stop_type = "手动终止"; break;
|
case 2 : stop_type = "核容测试时间到"; break;
|
case 3 : stop_type = "核容测试组端下限到"; break;
|
case 4 : stop_type = "核容测试单体下限到"; break;
|
case 5 : stop_type = "核容测试容量低于阀值"; break;
|
case 6 : stop_type = "应急供电组端下限到"; break;
|
case 7 : stop_type = "应急供电单体下限到"; break;
|
case 8 : stop_type = "市电恢复停止应急供电"; break;
|
case 9 : stop_type = "停止自动应急供电"; break;
|
case 10 : stop_type = "无法启动核容测试"; break;
|
case 11 : stop_type = "模块故障"; break;
|
case 12 : stop_type = "电池开路故障"; break;
|
case 16 : stop_type = "其他"; break;
|
}
|
return stop_type;
|
}
|
|
//4019(LD9)放电终止原因
|
public static String getTestType_4019(int testType)
|
{
|
String test_Type = "未知";
|
switch(testType)
|
{
|
case 1 : test_Type = "核容放电"; break;
|
case 2 : test_Type = "核容充电"; break;
|
case 3 : test_Type = "监测放电"; break;
|
case 4 : test_Type = "监测充电"; break;
|
}
|
return test_Type;
|
}
|
//4019(LD9)放电终止原因
|
public static String getStopType_4019(int stop_type_t)
|
{
|
String stop_type = "未知";
|
switch(stop_type_t)
|
{
|
case 0 : stop_type = "无"; break;
|
case 1 : stop_type = "手动终止"; break;
|
case 2 : stop_type = "单体下限到"; break;
|
case 3 : stop_type = "充电完成停止"; break;
|
case 4 : stop_type = "测试完成停止"; break;
|
case 5 : stop_type = "远程停止"; break;
|
case 6 : stop_type = "在线电压低"; break;
|
case 7 : stop_type = "温度异常高"; break;
|
case 8 : stop_type = "电流异常"; break;
|
case 9 : stop_type = "系统正在工作"; break;
|
case 10 : stop_type = "正在均衡测试"; break;
|
case 11 : stop_type = "正在内阻测试"; break;
|
case 12 : stop_type = "汇集器通信异常"; break;
|
case 13 : stop_type = "功率电缆异常"; break;
|
case 14 : stop_type = "主机停止（ld-18）"; break;
|
case 15 : stop_type = "从机通讯异常(ld-18)"; break;
|
}
|
return stop_type;
|
}
|
// 逆变设备放电终止原因9120和9140
|
public static String getStopType_9120(int stop_type_t)
|
{
|
String stop_type = "其他";
|
switch(stop_type_t)
|
{
|
case 0 : stop_type = "手动停止"; break;
|
case 1 : stop_type = "暂停"; break;
|
case 2 : stop_type = "正在放电测试"; break;
|
case 3 : stop_type = "正在等待放电"; break;
|
case 4 : stop_type = "正在限流充电"; break;
|
case 5 : stop_type = "正在直流充电"; break;
|
case 6 : stop_type = "正在等待充电"; break;
|
case 7 : stop_type = "放电时间到停止"; break;
|
case 8 : stop_type = "放电容量到停止"; break;
|
case 9 : stop_type = "单体电压下限到停止"; break;
|
case 10: stop_type = "组端电压下限到停止"; break;
|
case 11: stop_type = "市电中断停止"; break;
|
case 12: stop_type = "存储数据满停止"; break;
|
case 13: stop_type = "机内温度异常停止"; break;
|
case 14: stop_type = "放电电流过流停止"; break;
|
case 15:stop_type = "后台通信中断停止"; break;
|
case 16: stop_type = "负载模块通信中断停止"; break;
|
case 17: stop_type = "选择模块通信中断停止"; break;
|
case 18: stop_type = "负载模块放电过功率停止"; break;
|
case 19: stop_type = "内部程序异常停止"; break;
|
case 20: stop_type = "市电恢复停止升压放电"; break;
|
case 21: stop_type = "充电过程中市电中断"; break;
|
case 22: stop_type = "合路器放电功能组端电压下限到"; break;
|
case 23: stop_type = "单体温度上限到停止"; break;
|
case 24: stop_type = "在线电压异常高停止"; break;
|
case 25: stop_type = "协转通信异常停止"; break;
|
case 26: stop_type = "单体通信异常停止"; break;
|
case 27: stop_type = "未知"; break;
|
case 28: stop_type = "切换装置通信故障"; break;
|
case 29: stop_type = "切换装置故障"; break;
|
case 30: stop_type = "DCAC模块故障"; break;
|
case 31: stop_type = "负载功率小"; break;
|
case 32: stop_type = "干接点输入故障"; break;
|
case 33: stop_type = "母联通信异常"; break;
|
case 34: stop_type = "母联手动关闭"; break;
|
}
|
return stop_type;
|
}
|
// 一体机设备放电终止原因
|
public static String getStopType_8059(int stop_type_t)
|
{
|
String stop_type = "其他";
|
switch(stop_type_t)
|
{
|
case 0x00: stop_type = "手动停止"; break;
|
case 0x01: stop_type = "放电时间到"; break;
|
case 0x02: stop_type = "放电容量到"; break;
|
case 0x03: stop_type = "单体下限到"; break;
|
case 0x04: stop_type = "组端下限到"; break;
|
case 0x05: stop_type = "市电中断"; break;
|
case 0x06: stop_type = "内存不足"; break;
|
case 0x07: stop_type = "温度异常高"; break;
|
case 0x08: stop_type = "正在放电"; break;
|
case 0x09: stop_type = "手动暂停"; break;
|
case 0x0A: stop_type = "暂停放电"; break;
|
case 0x0B: stop_type = "通信故障"; break;
|
case 0x0C: stop_type = "电流故障"; break;
|
case 0x0D: stop_type = "压差上限到"; break;
|
case 0x0E: stop_type = "组端电压异常"; break;
|
case 0x0F: stop_type = "风扇异常"; break;
|
case 0x10: stop_type = "整流器电压异常"; break;
|
case 0x11: stop_type = "IGBT异常"; break;
|
case 0x12: stop_type = "辅助电源异常"; break;
|
case 0x13: stop_type = "CSV文件太大，请删除"; break;
|
case 0x14: stop_type = "BMS通信异常"; break;
|
case 0x15: stop_type = "存储异常"; break;
|
case 0x16: stop_type = "从机断开或通讯异常"; break;
|
case 0x17: stop_type = "从机状态异常"; break;
|
case 0x18: stop_type = "紧急停止"; break;
|
case 0x19: stop_type = "单体温度异常高"; break;
|
case 0x40: stop_type = "停止充电"; break;
|
case 0x41: stop_type = "暂停充电"; break;
|
case 0x42: stop_type = "正在充电"; break;
|
case 0x43: stop_type = "充电时间到"; break;
|
case 0x44: stop_type = "充电容量到"; break;
|
case 0x45: stop_type = "单体上限到"; break;
|
case 0x46: stop_type = "充电已完成"; break;
|
case 0x47: stop_type = "市电中断"; break;
|
case 0x48: stop_type = "温度异常高"; break;
|
case 0x49: stop_type = "通信故障"; break;
|
case 0x4A: stop_type = "充电模块异常"; break;
|
case 0x4B: stop_type = "组端上限到"; break;
|
case 0x4C: stop_type = "压差上限到"; break;
|
case 0x4D: stop_type = "电流异常"; break;
|
case 0x4E: stop_type = "组端电压异常"; break;
|
case 0x4F: stop_type = "风扇异常"; break;
|
case 0x50: stop_type = "整流器电压异常"; break;
|
case 0x51: stop_type = "IGBT异常"; break;
|
case 0x52: stop_type = "辅助电源异常"; break;
|
case 0x53: stop_type = "CSV文件太大，请删除"; break;
|
case 0x54: stop_type = "BMS通信异常"; break;
|
case 0x55: stop_type = "存储异常"; break;
|
case 0x56: stop_type = "从机断开或通讯异常"; break;
|
case 0x57: stop_type = "从机状态异常"; break;
|
case 0x58: stop_type = "紧急停止"; break;
|
}
|
return stop_type;
|
}
|
|
// 电操核容放电终止原因
|
public static String getStopType_6087(int stop_type_t)
|
{
|
String stop_type = "其他";
|
switch(stop_type_t)
|
{
|
case 0: stop_type = "无"; break;
|
case 1: stop_type = "暂停"; break;
|
case 2: stop_type = "正在放电测试"; break;
|
case 3: stop_type = "正在等待放电"; break;
|
case 4: stop_type = "正在限流充电"; break;
|
case 5: stop_type = "正在直连充电"; break;
|
case 6: stop_type = "正在等待充电"; break;
|
case 7: stop_type = "放电时间到停止"; break;
|
case 8: stop_type = "放电容量到停止"; break;
|
case 9: stop_type = "单体电压下限到停止"; break;
|
case 10: stop_type = "组端电压下限到停止"; break;
|
case 11: stop_type = "市电中断停止"; break;
|
case 12: stop_type = "存储数据满停止"; break;
|
case 13: stop_type = "机内温度异常停止"; break;
|
case 14: stop_type = "放电电流异常停止"; break;
|
case 15: stop_type = "后台通信中断停止"; break;
|
case 16: stop_type = "负载模块通信中断停止"; break;
|
case 18: stop_type = "负载模块放电过功率停止"; break;
|
case 19: stop_type = "(内部)程序异常停止"; break;
|
case 23: stop_type = "单体温度上限到停止"; break;
|
case 24: stop_type = "在线电压异常高停止"; break;
|
case 25: stop_type = "协转通信异常停止"; break;
|
case 26: stop_type = "单体通信异常停止(汇集器通信异常)"; break;
|
case 30: stop_type = "逆变器模块故障"; break;
|
case 31: stop_type = "负载功率小"; break;
|
case 32: stop_type = "干接点输入故障"; break;
|
case 35: stop_type = "逆变模块通信故障"; break;
|
case 36: stop_type = "防雷器故障"; break;
|
case 37: stop_type = "机柜表头通信故障"; break;
|
case 38: stop_type = "开关故障"; break;
|
case 39: stop_type = "开关量模块通信故障"; break;
|
case 40: stop_type = "母线压差大"; break;
|
case 41: stop_type = "继电器状态错误"; break;
|
case 42: stop_type = "远程闭锁"; break;
|
case 43: stop_type = "紧急停止"; break;
|
case 44: stop_type = "充电停止"; break;
|
case 45: stop_type = "蓄电池对外放电"; break;
|
case 46: stop_type = "空开故障"; break;
|
case 47: stop_type = "充电机故障"; break;
|
}
|
return stop_type;
|
}
|
|
// FBO4830放电终止原因
|
public static String getStopType_4830(int stop_type_t)
|
{
|
String stop_type = "其他";
|
switch(stop_type_t)
|
{
|
// 放电停止原因
|
case 0x00: stop_type = "手动停止"; break;
|
case 0x01: stop_type = "放电时间到"; break;
|
case 0x02: stop_type = "正在放电测试"; break;
|
case 0x03: stop_type = "单体下限到"; break;
|
case 0x04: stop_type = "组端下限到"; break;
|
case 0x05: stop_type = "市电中断"; break;
|
case 0x06: stop_type = "内存不足"; break;
|
case 0x07: stop_type = "温度异常高"; break;
|
case 0x08: stop_type = "正在放电"; break;
|
case 0x09: stop_type = "手动暂停"; break;
|
case 0x0A: stop_type = "暂停放电"; break;
|
case 0x0B: stop_type = "通信故障"; break;
|
case 0x0C: stop_type = "电流故障"; break;
|
case 0x0D: stop_type = "压差上限到"; break;
|
case 0x0E: stop_type = "组端电压异常"; break;
|
case 0x0F: stop_type = "风扇异常"; break;
|
case 0x10: stop_type = "整流器电压异常"; break;
|
case 0x11: stop_type = "IGBT异常"; break;
|
case 0x12: stop_type = "辅助电源异常"; break;
|
case 0x13: stop_type = "单体温度异常高"; break;
|
case 0x14: stop_type = "BMS通信异常"; break;
|
case 0x15: stop_type = "存储异常"; break;
|
case 0x16: stop_type = "从机断开或通讯异常"; break;
|
case 0x17: stop_type = "从机状态异常"; break;
|
case 0x18: stop_type = "紧急停止"; break;
|
|
// 充电停止原因
|
case 0x40: stop_type = "停止充电"; break;
|
case 0x41: stop_type = "暂停充电"; break;
|
case 0x42: stop_type = "正在充电"; break;
|
case 0x43: stop_type = "充电时间到"; break;
|
case 0x44: stop_type = "充电容量到"; break;
|
case 0x45: stop_type = "单体上限到"; break;
|
case 0x46: stop_type = "充电已完成"; break;
|
case 0x47: stop_type = "市电中断"; break;
|
case 0x48: stop_type = "温度异常高"; break;
|
case 0x49: stop_type = "通信故障"; break;
|
case 0x4A: stop_type = "充电模块异常"; break;
|
case 0x4B: stop_type = "组端上限到"; break;
|
case 0x4C: stop_type = "压差上限到"; break;
|
case 0x4D: stop_type = "电流异常"; break;
|
case 0x4E: stop_type = "风扇异常"; break;
|
case 0x50: stop_type = "整流器电压异常"; break;
|
case 0x51: stop_type = "IGBT异常"; break;
|
case 0x52: stop_type = "辅助电源异常"; break;
|
case 0x53: stop_type = "单体温度异常高"; break;
|
case 0x54: stop_type = "BMS通信异常"; break;
|
case 0x55: stop_type = "存储异常"; break;
|
case 0x56: stop_type = "从机断开或通讯异常"; break;
|
case 0x57: stop_type = "从机状态异常"; break;
|
case 0x58: stop_type = "紧急停止"; break;
|
}
|
return stop_type;
|
}
|
|
//设备状态变换对应关系
|
public static String getFbsdev_Statechange(int state){
|
String state_name="停止";
|
switch(state){
|
case 0:state_name="停止";break;
|
case 1:state_name="放电";break;
|
case 2:state_name="充电";break;
|
}
|
return state_name;
|
}
|
}
|
